Prominence Home 40278 Owner's Manual page 5

Mounting Bracket
Screws
Canopy
Mounting Bracket
Motor Assembly
Closemount Screw
Canopy
Mounting Bracket
ASSEMBLY INSTRUCTIONS
1
2
Motor Screw
Motor Block
3
Hook
4
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
2. Remove the mounting bracket by removing the two
mounting bracket screws from the round holes in the
canopy. Then loosen the other two mounting bracket
screws from the J-shaped slots. Retain the mounting
bracket screws for later. Install the mounting bracket
to the outlet box (not included) using the screws and
washers provided with the outlet box.
Warning: To reduce the risk of fire, electric shock,
or personal injury, mount to the outlet box marked
"acceptable for fan support" and use the mounting
screws and washers provided with the outlet box.
3. Remove all 10 preassembled motor screws and plastic
motor blocks from the underside of the motor assembly.
Discard the motor blocks, but save the motor screws for
later use.
4. CLOSEMOUNT INSTALLATION (OPTIONAL)
a. Remove the canopy cover from the bottom of the
canopy.
b. Remove the three Phillips-head closemount screws from
the top of the motor assembly.
c. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor assembly. The larger
holes in the canopy will encompass the three pre-installed
screws.
d. Secure the canopy to the top of the motor assembly
with the closemount screws that were previously
removed.
e. Hang the fan on the hook of the mounting bracket.
Proceed to Step 9.
5