Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Prominence Home Espy 52
Summary of Contents for Prominence Home Espy 52
-
Page 2: Package Contents
PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Mounting Bracket 8. Light Kit 2. Mounting Bracket Screw 9. Bowl Housing (x4) 10. Blade (x3) 3. Motor Assembly 11. Hardware Kit 4. - Page 3 EXPLODED VIEW DETAIL Mounting Bracket Screw Hook Mounting Bracket Motor Assembly Blade Fitter Plate Fitter Plate Screw Light Kit Bowl Housing DIMENSION REFERENCE A. 10.74 in. B. 8.51 in. C. 6.69 in.
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. CAUTION: All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan. - Page 5 SAFETY INSTRUCTIONS WARNING: To avoid risk of electric shock, be sure to shut off power at the main fuse or circuit breaker box before installing or servicing this fixture. Turning off the electrical power by using the light switch is not sufficient to prevent electrical shock.
- Page 6 ASSEMBLY INSTRUCTIONS 1. Turn OFF the electrical power at the main fuse or circuit breaker. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. Mounting 2. Loosen all four mounting bracket screws, then Bracket completely remove two mounting bracket screws from Screw...
- Page 7 ASSEMBLY INSTRUCTIONS Braided Cable SECONDARY HANGING SYSTEM For installation in the United States: Building codes in the U.S.A. do not require installation of a Secondary Brace Hanging System. If desired, the braided cable can be cut and removed using wire cutters (sold separately). Skip to Outlet Box Step 8.
- Page 8 ASSEMBLY INSTRUCTIONS Mounting Bracket Screw 9. Slide the top of the motor assembly over the mounting bracket, aligning the slotted holes in the top of the motor assembly with the previously loosened mounting bracket screws in the mounting bracket. Twist the motor assembly clockwise to lock.
- Page 9 ASSEMBLY INSTRUCTIONS 13. Remove one of the fitter plate screws preassembled to the fitter plate and loosen the other two screws but do not remove. Connect the single-pin connectors from the fitter Fitter plate to the single-pin connectors from the light kit -- blue Single Pin Plate Connector...
- Page 10 ASSEMBLY INSTRUCTIONS 17. If desired, the wall bracket in remote pack can be Wall Bracket installed to a wall using the provided mounting screws. Store the remote on the wall bracket when not in use. Mounting Screw 18. Turn on the circuit breakers and the wall switch to the fan supply lead lines.
- Page 11 OPERATING INSTRUCTIONS 1. To operate the fan using the remote from remote pack, press and release the following buttons: LED Indicator III - High speed High Speed II - Medium speed Medium Speed I - Low speed Low Speed Fan Off - Turns power off to fan. Fan Off Light Delay - Tap the light delay button, which will turn off the light after one minute.
-
Page 12: Troubleshooting
TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-706-3267, 8 a.m. -
Page 13: Limited Lifetime Warranty
LIMITED LIFETIME WARRANTY To obtain service, please contact the Service Department: 1-877-706-3267, 8 a.m. - 5 p.m. Central, Monday - Friday. Model Name: 52” Ceiling Fan Model No: 51463 - Bright Whte 51464 - Matte Black 51465 - Gun Metal Set forth below, the manufacturer, Hong Kong China Electric appliance Company (HKC) warrants the fan motor for this ceiling fan to be free from defects in workmanship and material for the life of the product.