Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Prominence Home Potomac 51639
Summary of Contents for Prominence Home Potomac 51639
-
Page 2: Package Contents
PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Canopy 12. Fitter Plate 2. Canopy Cover 13. Fitter Plate Screw (x3) 14. Light Pan 3. Mounting Bracket Screw (x4) 15. Light Pan Screw (x3) 4. -
Page 3: Mounting Options
DIMENSION REFERENCE A. 13.2 in. B. 9.86 in. C. 7.86 in. D. 5.13 in. MOUNTING OPTIONS Two Mounting Options Downrod Mount Angled Ceiling Mount (Up to 10 degrees) Choose one of the following mounting options: Downrod Mount is best suited for ceilings 8 ft. or higher. For taller ceilings you may want to use a longer downrod (not included). -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. CAUTION: All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan. - Page 5 SAFETY INSTRUCTIONS WARNING: To avoid risk of electric shock, be sure to shut off power at the main fuse or circuit breaker box before installing or servicing this fixture. Turning off the electrical power by using the light switch is not sufficient to prevent electrical shock.
- Page 6 ASSEMBLY INSTRUCTIONS 1.Turn OFF the electrical power at the main fuse or circuit breaker. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. Loosen all four mounting bracket screws and Mounting Bracket Screw completely remove the two screws from the round holes in the canopy.
- Page 7 ASSEMBLY INSTRUCTIONS Braided 5. Insert the downrod through the canopy and yoke cover. Cable Feed the wires and braided cable from the fan through the downrod. Canopy Yoke Cover Downrod Yoke 6. Slide the downrod into the yoke of the motor assembly, align the holes, then re-install the downrod pin and downrod clip.
- Page 8 ASSEMBLY INSTRUCTIONS Braided Cable SECONDARY HANGING SYSTEM For installation in the United States: Building codes in the U.S.A. do not require installation of a Secondary Brace Hanging System. If desired, the braided cable can be cut and removed using wire cutters (sold separately). Skip to Step 12.
- Page 9 ASSEMBLY INSTRUCTIONS Push-in Connector 12. Use wire connectors and push-in connectors to connect Black (hot/power) the receiver and fan wires to the supply wires from outlet White (neutral) box according to the wiring diagram and the following Bare/Green instructions: (ground) •...
- Page 10 ASSEMBLY INSTRUCTIONS 16. Remove one of the three fitter plate screws preassembled to the fitter plate and loosen the other two Fitter Plate but do not remove. Feed the 9-pin connector through the center hole in the light pan. Align the slotted holes in the light pan with the loosened screws in the fitter plate.
- Page 11 ASSEMBLY INSTRUCTIONS Back Front 19. Remove the battery door from the back of the remote using a flat-head screwdriver (not included). Insert the two CR2032 batteries into the remote; ensure the positive pole of the batteries face up (as pictured) and then replace the battery door.
- Page 12 OPERATING INSTRUCTIONS LED Indicator 1. To operate the fan using the remote, press and release Fan Off the following buttons: Light On/Off Fan Off - Turns the power to fan off. Light On/Off - Turns the light on and off. Press and hold to High Speed dim or brighten lights (for dimmable bulbs only).
- Page 13 OPERATING INSTRUCTIONS 4. Using a ceiling fan will allow you to raise your Reverse Switch thermostat setting in summer and lower your thermostat setting in winter without feeling a difference in your comfort. In warmer weather, push the reverse switch left which will result in downward airflow creating a wind chill effect.
-
Page 14: Troubleshooting
TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-706-3267, 8 a.m. -
Page 15: Limited Lifetime Warranty
LIMITED LIFETIME WARRANTY To obtain Service, please contact the Service Department: 1-877-706-3267, 8 a.m. - 5 p.m. Central, Monday - Friday. Model Name: 52” Ceiling Fan Model No: 51639 - Matte Black 51640 - Pewter 51641 - Blue Set forth below, the manufacturer, Hong Kong China Electric appliance Company (HKC) warrants the fan motor for this ceiling fan to be free from defects in workmanship and material for the life of the product.