Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Prominence Home Cicero 52
Summary of Contents for Prominence Home Cicero 52
- Page 2 PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Canopy 14. Ribbed Glass 2. Canopy Cover 15. Glass Bowl 3. Mounting Bracket 16. Fitter Plate Screw (x 3) 4. Downrod 17. E26-base LED Bulb (x 3) 5.
-
Page 3: Mounting Options
DIMENSION REFERENCE A. 14.1 in. B. 8.82 in. C. 8.24 in. D. 5.01 in. MOUNTING OPTIONS Two Mounting Options Downrod Mount Angled Ceiling Mount (Up to 16 degrees) Choose one of the following mounting options: Downrod Mount is best suited for ceilings 8 ft. or higher. For taller ceilings you may want to use a longer downrod (sold separately). - Page 4 SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. CAUTION: All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan.
- Page 5 ASSEMBLY INSTRUCTIONS 1. Turn OFF the electrical power at the main fuse or circuit breaker. 2. Remove the canopy from the mounting bracket by Mounting removing the two mounting bracket screws from the Bracket Screw round holes in the canopy and save for later use. Then loosen the other two mounting bracket screws from the J-shaped slots.
- Page 6 ASSEMBLY INSTRUCTIONS 5. Feed the wires coming from the yoke through the yoke cover, canopy and out through the top of the downrod. Downrod Canopy Yoke Cover Yoke 6. Insert the downrod into the yoke and reinstall the Downrod downrod pin and downrod clip. Then retighten the two Yoke set screws.
- Page 7 ASSEMBLY INSTRUCTIONS 8. Use wire connectors to connect the fan wires to the Black (Hot) power supply wires according to the wiring diagram and White (Neutral) the following instructions: Bare/Green (Ground) • Connect the white wire from the fan to the white (neutral/ common) supply wire.
- Page 8 ASSEMBLY INSTRUCTIONS 12. Remove one of the three fitter plate screws preassembled to the fitter plate from the round hole and loosen the other two but do not remove. Connect the 9-pin connector from the fitter plate to the 9-pin 9-pin Fitter Plate Screw Connector...
- Page 9 ASSEMBLY INSTRUCTIONS 16. Feed the pull chains through the appropriate holes in the glass bowl. Then, lift the glass bowl over the threaded rod until it is flush with the plastic spacer. Lift the finial cap onto the threaded rod and secure with the finial. Glass Bowl Finial Cap Finial...
- Page 10 OPERATING INSTRUCTIONS 1. The fan pull chain is located in the off-center hole in the finial cap. It has four positions to control fan speed. One pull is HIGH, two is MEDIUM, three is LOW and four turns the fan OFF. The light pull chain is located in the center of the finial.
-
Page 11: Troubleshooting
TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in , 8 a.m. -
Page 12: Limited Lifetime Warranty
LIMITED LIFETIME WARRANTY To obtain Service, please contact the Customer Service: , 8 a.m. - 5 p.m. Central, Monday - Friday. 1-877-706-3267 Model Name: 52” Ceiling Fan Model No: 50880 - Brushed Nickel Subject to the limitations set forth below, Hong Kong China Electric appliance Company (HKC) warrants the fan motor for this ceiling fan to be free from defects in workmanship and material for the life of the product.
Need help?
Do you have a question about the Cicero 52 and is the answer not in the manual?
Questions and answers