Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Prominence Home 51584
Summary of Contents for Prominence Home 51584
-
Page 2: Package Contents
PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Motor Housing 10. Blade (x5) 2. Upper Mounting Bracket 11. Blade Arm (x5) 3. Lower Mounting Bracket 12. Hardware Kit 4. Motor 13. - Page 3 EXPLODED VIEW DETAIL Upper Mounting Bracket Motor Housing Lower Mounting Bracket Blade Motor Blade Arm Switch Housing Light Kit Bulb Glass Globe DIMENSION REFERENCE A. 11.97 in. B. 5.88 in. C. 7.98 in. D. 9.39 in.
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. CAUTION: All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan. - Page 5 SAFETY INSTRUCTIONS WARNING: To avoid risk of electric shock, be sure to shut off power at the main fuse or circuit breaker box before installing or servicing this fixture. Turning off the electrical power by using the light switch is not sufficient to prevent electrical shock.
- Page 6 ASSEMBLY INSTRUCTIONS 1. Turn OFF the electrical power at the main fuse or circuit breaker. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. Secure the upper mounting bracket to the outlet box using screws, spring washers, provided with the outlet box (not included).
- Page 7 ASSEMBLY INSTRUCTIONS Braided Cable SECONDARY HANGING SYSTEM For installation in the United States: Building codes Brace in the U.S.A. do not require installation of a Secondary Hanging System. If desired, the braided cable can be cut and removed using wire cutters (sold separately). Skip to Step 8.
- Page 8 ASSEMBLY INSTRUCTIONS 8. Use wire connectors to connect the fan wires to the power supply wires according to the wiring diagram Black (live) and the following instructions: White (neutral) • Connect the white wire from the fan to the white Bare/Green (ground) (neutral) supply wire.
- Page 9 ASSEMBLY INSTRUCTIONS 12. Install the E26-base LED bulb in the socket. Important: Make sure you allow the bulbs and light kit to cool before you replace the bulbs. Bulb 13. Loosen the three thumbscrews near the bottom of the light kit. Lift the glass globe into the light kit and retighten the previously loosened thumbscrews to secure.
- Page 10 OPERATING INSTRUCTIONS 1. Use the fan reverse switch, located on the switch housing to optimize your fan for seasonal performance. Using a ceiling fan will allow you to raise your thermostat Reverse Switch setting in summer and lower your thermostat setting in winter without feeling a difference in your comfort.
-
Page 11: Troubleshooting
TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in , 8 a.m.-5 p.m. -
Page 12: Limited Lifetime Warranty
, 8 a.m.-5 p.m. Central, Monday-Friday. 1-877-706-3267 Model Name: 44” Ceiling Fan Model No: 51584 - Espresso 51585 - Brushed Nickel Set forth below, the manufacturer, Hong Kong China Electric appliance Company (HKC) warrants the fan motor for this ceiling fan to be free from defects in workmanship and material for the life of the product.