Prominence Home Liva 51016 Owner's Manual
  1. Manuals
  2. Brands
  3. Prominence Home Manuals
  4. Fan
  5. Liva 51016
  6. Owner's manual

Prominence Home Liva 51016 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Prominence Home Liva 51016

Summary of Contents for Prominence Home Liva 51016

  • Page 2: Package Contents

    PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Canopy 11. Motor 2. Canopy Cover 12. Fitter Plate 3. Mounting Bracket 13. Fitter Plate Screw (x3) 4. Mounting Bracket Screw 14. Light Kit (x4) 15.
  • Page 3 DIMENSION REFERENCE A. 14.6 in. B. 7.1 in. C. 7.5 in. D. 5.13 in. MOUNTING OPTIONS Dual Mount Options Downrod Mount Angle Ceiling Mount (Up to 16 degrees) Choose one of the following mounting options: Downrod Mount is best suited for ceilings 8 ft. or higher. For taller ceilings you may want to use a longer downrod (not included).

  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. CAUTION: All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan.
  • Page 5 ASSEMBLY INSTRUCTIONS 1. Turn OFF the electrical power at the main fuse or circuit breaker. 2. Remove the mounting bracket by removing the two Mounting Bracket mounting bracket screws from the round holes in the Screws canopy. Then loosen the other two mounting bracket screws from the J-shaped slots.
  • Page 6 ASSEMBLY INSTRUCTIONS 5. Feed the wires coming from the yoke through the yoke cover, canopy, and downrod. Downrod Canopy Yoke Cover Yoke 6. Insert the downrod into the yoke and reinstall the downrod pin and downrod clip. Then retighten the two Yoke Cover set screws.
  • Page 7 ASSEMBLY INSTRUCTIONS Mounting 9. Raise the canopy, ensure the two mounting bracket Bracket Screw screws are aligned with the J-shaped slots in the canopy. Then turn the canopy in a clockwise direction until the Round Hole mounting bracket screws are completely engaged in the J-shaped slots.
  • Page 8 ASSEMBLY INSTRUCTIONS 13. Unscrew and remove the light rings from the bottom of the three light housings. Then, install the GU10-base Light Housing LED bulbs and re-install the light rings. Bulb Light Ring 14. Attach the pull chain extensions to each of the pull chains.
  • Page 9 OPERATING INSTRUCTIONS 1.The fan pull chain has four positions to control the fan speed. One pull is HIGH, two is MEDIUM, three is LOW, and four turns the fan OFF. The pull chain in the center of the light kit turns the lights ON and OFF. Fan Pull Chain Light Pull Chain...

  • Page 10: Troubleshooting

    TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-706-3267, 9 a.m.- 5 p.m.

  • Page 11: Limited Lifetime Warranty

    LIMITED LIFETIME WARRANTY To obtain Service, please contact the Service Department: 1-877-706-3267, 9 a.m.- 5 p.m. Central time. Model Name: 48” Civa Ceiling Fan Model No: 51016 - Chrome The manufacturer warrants this fan to be free from defects in workmanship and materials present at time of shipment from the factory for a lifetime from the date of purchase by the original purchaser.

Table of Contents