Turn Off Firewall; Set Pc Network - HikRobot SC2000E Mini Series Quick Start Manual

SC2000E(Mini) Series Vision Sensor Quick Start Guide

5.2 Turn off Firewall

To ensure stable client running and image transmission, you are recommended turning off
Windows firewall before using the client software.
Steps
Note
For different Windows versions, the path name or interface may differ. Please refer to the
actual condition.
1. Go to Windows Firewall.
Windows XP system: Click Start → Control Panel → Security Center → Windows Firewall.
Windows 7 system: Click Start → Control Panel → Windows Firewall.
Windows 10 system: Click Start → Control Panel → System and Security → Windows Defender
Firewall.
2. Click Turn Windows Defender Firewall on or off on the left.
3. Select Turn off Windows Defender Firewall (not recommended).
4. Click OK.

5.3 Set PC Network

To ensure stable image transmission and normal communication between the PC and the device via
client software, you need to set the PC network before using the client software.
Steps
Note
For different Windows versions, the specific setting path and interface may differ. Please refer
to the actual condition.
Steps
1. Go to PC network settings page: Start → Control Panel → Network and Internet → Network
and Sharing Center → Change adapter settings.
2. Select NIC and set the IP obtainment mode.
Figure 5-2 Windows Defender Firewall
8