Turn Off Firewall - HikRobot SC2000E Series Quick Start Manual
Vision sensor
Hide thumbs
Also See for SC2000E Series:
- Quick start manual (31 pages) ,
- Quick start manual (34 pages) ,
- Quick start manual (34 pages)
Table of Contents
Advertisement
3. Set NIC property.
1) Go to NIC settings page: Control Panel → Hardware and Sound → Device Manager →
Network Adapter.
2) Select corresponding network interface card, and click Link Speed.
3) Set Speed and Duplex as Auto-Negotiation or 100 Mbps.
5.2 Turn off Firewall
To ensure stable client running and image transmission, you are recommended turning off Windows
firewall before using the client software.
Steps
Note
For different Windows versions, the path name or interface may differ. Please refer to the actual
condition.
1. Go to Windows Firewall.
Windows XP system: Click Start → Control Panel → Security Center → Windows Firewall.
Windows 7 system: Click Start → Control Panel → Windows Firewall.
Windows 10 system: Click Start → Control Panel → System and Security → Windows Defender
Firewall.
2. Click Turn Windows Defender Firewall on or off on the left.
3. Select Turn off Windows Defender Firewall (not recommended).
SC2000E Series Vision Sensor Quick Start Guide
Figure 5-1 Set PC Network
8
Advertisement
Table of Contents
Need help?
Do you have a question about the SC2000E Series and is the answer not in the manual?