Led Pattern Selection Settings - JCM GLOBAL Taiko PUB-7 Manual

March, 2017
LED P
ATTERN
The Bezel LED oscillating Pattern Color can be changed to oscillate between
two preset changing Color patterns.
To select and set Color Pattern #1, proceed as follows:
1. Remove power from the Taiko
2. Set DIP Switches #1, #2 and #7 to ON.
3. Reapply power to the Taiko
4. When the White LED begins to flash, turn DIP Switch #1 OFF.
The selected pattern is now set.
5. Remove power from the Taiko
operating positions, and reapply power to the Unit.
To select and set Color Pattern #2, proceed as follows:
1. Remove power from the Taiko
2. Set DIP Switches #1, #3 and #7 to ON.
3. Reapply power to the Taiko
4. When the White LED begins to flash, turn DIP Switch #1 OFF.
The selected pattern is now set.
Remove power from the Taiko
positions, and reapply power to the Unit.
Part No. 960-100919R_Rev. 1
JCM Training Overview
S S
ELECTION ETTINGS
™
™
™
Unit, reset the DIP Switches to their normal operating
Lecture Notes
™
Unit.
Unit.
™
Unit, reset the DIP Switches to their normal
™
Unit.
Unit.
6
Taiko™ Banknote Validator
© 2017 JCM American Corporation