Getting Started (Spot-Checking); Unpack Instrument; Install Rdo Cap And Ph/Orp Sensor; Download And Install Software - In-situ Aqua TROLL 500 Operator's Manual

Follow the steps below to set up and deploy the Aqua TROLL 500 when you intend to take live readings. See
the next page for information about setting up and using the instrument in remote-monitoring applications.
1

Unpack instrument.

Remove sonde, sensors and maintenance supplies from box.
2

Install RDO cap and pH/ORP sensor.

a. If your instrument includes a pH/ORP sensor, you'll need to install it prior to calibration and
deployment.
b. Install the RDO cap on the RDO sensor.
3

Download and install software.

• Download the VuSitu Mobile App from the Play Store or Apple Store.
• PC users download Win Situ 5 from www.in-situ.com
4

Connect instrument to TROLL Com.

a. Attach the Rugged Cable to the TROLL Com and Aqua TROLL 500.
b. Press power button on TROLL Com and pair with the VuSitu mobile app.
5

Calibrate.

Perform a single or multi-point calibration.
6

Configure the instrument and take readings.

a. Create a site in VuSitu.
b. Take readings in VuSitu's Snapshot or Live Readings mode.
c. Save readings and share via email, SMS or cloud storage.
1-970-498-1500

Getting Started (Spot-Checking)

32 www.in-situ.com