Connecting Room Computers And Guest Laptops - Smart Technologies SMART Board 7000 R Series User Manual

Chapter 4 Connecting computers and other devices
Using SMART software
For information about using SMART software, see the following pages in the Support section of the
SMART website:
SMART Notebook
l
Lumio by SMART
l
SMART Learning Suite
l
SMART TeamWorks
l
SMART Meeting Pro
l
SMART Product Drivers and SMART Ink
l
SMART Remote Management
l
SMART Product Drivers and Ink are installed and used on the computer input of the display to enable
touch and digital inking features. This supporting software is included with SMART's software products,
such as SMART Notebook, SMART Meeting Pro, and SMART TeamWorks, or is available for free
download on smarttech.com/docs/redirect/?product=ink&context=download.
SMART Product Drivers and Ink software have a number of features you can use to customize default
settings for your display and troubleshoot common issues:
Adjust pen default settings, such as color and line thickness.
l
Adjust touch, mouse, and gesture settings.
l
Calibrate the display to ensure touch behaves as expected.
l
Turn SMART Ink on or off.
l
Use SMART Ink in Microsoft Office products.
l

Connecting room computers and guest laptops

You can connect room computers and guest laptops to the display and view and interact with them.
Notes
Install SMART software on any computers you connect to the display (see Installing and using
l
SMART software on page 30).
Your organization's installers might have connected cables to the display and run the cables
l
behind a wall or under the floor to a desk or table where you can place your computer.
smarttech.com/kb/171539 32