Using The Pens And Erasers; Pairing The Pens With The Display - Smart Technologies SMART Board 7000 R Series User Manual

Chapter 2 Using basic features
Erase with palm

Using the pens and erasers

The display comes with black, red, blue and green pens and two
erasers. You can use the pens to write and draw in digital ink on the
display, and you can use the erasers—or your palm or fist—to erase
digital ink.
There are magnetic holders for the pens and erasers at the bottom of
the display. Removing a pen from its holder activates it. Return the
pens and erasers to their holders when you're done with them.
Returning a pen to its holder charges it.
Caution
When you return a pen or eraser to its holder, make sure it's centered in the holder to keep it from
falling and being damaged. Pens' lights turn on to indicate that they're properly positioned in their
holders.

Pairing the pens with the display

After you install the display and turn it on for the first time, place the pens in the holders for at least five
minutes. This pairs the pens with the display and charges them for testing purposes.
Important
Use only pens designed for SMART Board 7000R and 7000R Pro series interactive displays. Pens
l
for other SMART products, including SMART Board 7000 and 7000 Pro series interactive displays,
aren't compatible with SMART Board 7000R and 7000R Pro series interactive displays (see
smarttech.com/kb/171230).
smarttech.com/kb/171539
Erase with fist
21