Using Touch - Smart Technologies SMART Board 7000 R Series User Manual

Chapter 2 Using basic features
No. Name
1
Power
2 Home
3 Up and down
buttons
4 OK
5 Left and right
buttons
6 Back
7 Input
8 Settings
9
Screen shade
10
Freeze frame
11 Volume increase
12 Volume decrease
13 Volume mute
14
Share screen

Using touch

You can do everything on the display that you can do at your computer—open and close applications,
meet with others, create new documents or edit existing ones, visit websites, play and manipulate videos,
and so on—by touching the display's surface.
You can use a variety of gestures within applications, including panning, scaling, rotating, and zooming
in and out.
smarttech.com/kb/171539
Procedure
Press to wake the display or put it back to sleep (see Waking up the
l
display and putting it back in to an energy saving mode on
page 14).
Press and hold for four seconds to turn off the display.
l
Press and hold for 10 seconds to reset the display.
l
Open the Home screen or the Input screen (see Using the Home
button on page 15).
Select a menu option in the settings.
Select menu option in the settings.
Change the value of the selected setting.
Go one step back in the navigation history.
Switch input sources (see Viewing a connected computer's input
on page 36).
Open iQ Settings.
Hide screen contents behind a screen shade (see Showing and
hiding the screen shade on page 25).
Freeze and unfreeze the screen (see page 24).
Increase the volume (see Adjusting the volume on page 24).
Decrease the volume (see Adjusting the volume on page 24).
Mute the volume (see Adjusting the volume on page 24).
Open the Screen Share app (see Sharing your device's screen to
the display).
Note
This button is not available on all remote control models.
19