Using The Remote Control - Smart Technologies SMART Board 7000 R Series User Manual

Chapter 2 Using basic features
Note
The Power button indicates the display's status:
Power button
Off
Amber
White

Using the remote control

The display comes with one of two infrared remote control models. These models are similar, except one
has a screen sharing button.
Use the infrared remote control to turn the display on or off, change the input source, change the
volume, access the display's iQ apps, and more. You can also use the remote control to open the on-
screen menus and change the display's settings.
Important
Do not subject the remote control to strong shock.
l
Keep the remote control away from liquids. If it gets wet, wipe it dry immediately.
l
Do not expose the remote control to heat or steam.
l
Do not open any part of the remote control other than the battery compartment.
l
The image and table below list the remote control's functions.
smarttech.com/kb/171539
Display status
Not receiving power
In an energy saving mode
In normal operating mode
17