Chapter 2 Using Basic Features; Waking Up The Display And Putting It Back In To An Energy Saving Mode - Smart Technologies SMART Board 7000 R Series User Manual

Chapter 2 Using basic features

Waking up the display and putting it back in to an energy saving mode
Using the Home button
Using the convenience panel
Using the remote control
Using touch
Using the pens and erasers
Pairing the pens with the display
Writing and drawing in digital ink
Using the SMART Ink dynamic (floating) toolbar
Changing a pen's default color, thickness, and other properties
Determining a pen's status
Erasing digital ink
Adjusting the volume
Freezing or hiding the screen
Freezing the screen
Showing and hiding the screen shade
Waking up the display and putting it back in to an
energy saving mode
The display's proximity sensors can detect people up to 16' (5 m) away when the display is in an energy
saving mode. Depending on how the display is configured, it either turns on or enters Ready mode when
the sensors detect people.
If the display is in Ready mode, you can turn it on in a number of ways:
Press the Power button
l
Pick up a pen or the eraser.
l
The display returns to an energy saving mode when one of the following occurs:
The sensors detect no motion in the room for 60 minutes.
l
You press the Power button
l
smarttech.com/kb/171539
on the convenience panel or the remote control.
on the convenience panel or the remote control.
14
15
16
17
19
21
21
22
22
23
23
23
24
24
24
25
14