Proximity Sensors; Ambient Light Sensor - Smart Technologies SMART Board 7000 R Series User Manual

Chapter 1 Welcome

Proximity sensors

mode.
Notes
For more information on energy saving modes, see the SMART Board 7000R and 7000R Pro
l
series interactive displays installation and maintenance guide (smarttech.com/kb/171538).
The proximity sensors respond only when the display is in the networked standby power state.
l
They do not respond in the standby power state.
For more information, see Waking up the display and putting it back in to an energy saving mode on
page 14.

Ambient light sensor

smarttech.com/kb/171539
The proximity sensors are located in the top-left and top-right corners of the
display's frame.
The proximity sensors can detect people up to 16' (5 m) away when the
display is in an energy saving mode.
When the proximity sensors detect people in the room, the display turns on,
depending on how it's configured.
If the room is empty for 60 minutes, the display returns to an energy saving
The ambient light sensor is located in the top-right corner of the display's
frame.
The ambient light sensor detects the brightness of the room and adjusts the
screen's brightness accordingly.
10