Kia Carnival Manual page 275

Features of your vehicle
detailed location of the detecting
sensor.
NOTICE
Always keep the front view camera
in good condition to maintain opti -
mal performance of High Beam
Assist.
For more details on the precautions
of the front view camera, refer
to"Forward Collision-Avoidance
Assist (FCA) (Sensor fusion) (if
equipped)" on page 6-74.
Function Setting
With the ENGINE START/STOP but -
ton in the ON position, select 'Lights
→ High Beam Assist' from the Set -
tings menu to turn on High Beam
Assist and deselect to turn off the
function.
WARNING
For your safety, change the Set -
tings after parking the vehicle at a
safe location.
Function Operation
Display and control
After selecting 'High Beam Assist'
in the Settings menu, High Beam
Assist will operate by following
the procedure below.
- Place the headlamp switch in
the AUTO position and push the
headlamp lever towards the
instrument cluster. The High
Beam Assist (
light will illuminate on the clus -
ter and the function will be
enabled.
- When the function is enabled,
high beam will turn on when
vehicle speed is above 40 km/h
(25 mph). When vehicle speed is
below 25 km/h (15 mph), high
beam will not turn on.
- The High Beam (
light will illuminate on the clus -
ter when high beam is on.
When High Beam Assist is operat -
ing, if the headlamp lever or
switch is used, the function oper -
ates as follow:
- If the headlamp lever is pulled
towards you when the high
beam is off, the high beam will
turn on without High Beam
Assist cancelled. When you let
go of the headlamp lever, the
lever will move to the middle
and the high beam will turn off.
Lighting
) indicator
4
) indicator
4 151