Kia Carnival Manual page 462

Driving your vehicle
The front vehicle's ground clear -
ance is low or high
A vehicle, pedestrian or cyclist
suddenly cuts in front
The bumper around the front
radar is impacted, damaged or
the front radar is out of position
The temperature around the
front radar is high or low
Driving through a tunnel or iron
bridge
Driving in large areas where there
are few vehicles or structures (i.e.
desert, meadow, suburb, etc.)
Driving near areas containing
metal substances, such as a con -
struction zone, railroad, etc.
A material is near that reflects
very well on the front radar, such
as a guardrail, nearby vehicle, etc.
The cyclist in front is on a bicycle
made of material that does not
reflect on the front radar
The vehicle in front is detected
late
The vehicle in front is suddenly
blocked by a obstacle
The vehicle in front suddenly
changes lane or suddenly reduces
speed
The vehicle in front is bent out of
shape
The front vehicle's speed is fast or
slow
The vehicle in front steers in the
opposite direction of your vehicle
to avoid a collision
6 84
Forward Collision-Avoidance Assist (FCA) (Sensor
With a vehicle in front, your vehi -
cle changes lane at low speed
The vehicle in front is covered
with snow
You are departing or returning to
the lane
Unstable driving
You are on a roundabout and the
vehicle in front is not detected
You are continuously driving in a
circle
The vehicle in front has an
unusual shape
The vehicle in front is driving
uphill or downhill
The pedestrian or cyclist is not
fully detected, for example, if the
pedestrian is leaning over or is not
fully walking upright
The pedestrian or cyclist is wear -
ing clothing or equipment that
makes it difficult to detect as a
pedestrian or cyclist
The illustration above shows the image
the front view camera and front radar
will detect as a vehicle, pedestrian and
cyclist.
OADAS044
The pedestrian or cyclist in front
is moving very quickly
fusion)