Kia Carnival Manual page 80

Safety features of your vehicle
3rd row outboard seat (7, 8 seats)
OKA4030040
Routing the seat belt webbing
through the rear seat belt guides
will help keep the belts from being
trapped behind or under the seats.
After inserting the seat belt, tighten
the belt webbing by pulling it up.
CAUTION
When using the seat belt, use it
after taking it out of the guides. If
you pull the seat belt when it is
stored in the guides, it may damage
the guides and/or belt webbing.
3 56
Pre-tensioner seat belt
OSP2I039024
Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts.
The purpose of the pre-tensioner is
to make sure that the seat belts fit
tightly against the occupant's body
in certain collisions.
The pre-tensioner seat belts may
be activated in crashes where the
collision is severe enough.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor
will lock into position. In certain
frontal collisions, the pre-tensioner
will activate and pull the seat belt
into tighter contact against the
occupant's body.
If the system senses excessive ten -
sion on the driver or passenger's
seat belt when the pre-tensioner
system activates, the load limiter
inside the retractor pre-tensioner
Seat belts