Features of your vehicle
5. It is initialized when the shift dial
is changed to a position other
than R (Reverse), or the rearview
mirror selector lever is changed to
the neutral position. (Initialized
position will be applied from next
operation)
6. You can initialize settings for the
mirror on the other side by fol -
lowing the same procedures (1-
5).
CAUTION
We recommend following the proce -
dures in an orderly manner to
change or initialize the auto revers -
ing user settings.
If you move to the next step before
completing the previous one, the
changed angle may not be changed
or initialization may not work prop -
erly
4
82
Mirrors