Kia Carnival Manual page 596

Driving your vehicle
'Agree' must be selected on the
infotainment system screen and
the infotainment system has to
operate properly to use Remote
Operation function.
Method (2) can be used after the
vehicle has been driven above 5
km/h (3 mph).
If the function is turned on again
after parallel parking is completed
by Remote Smart Parking Assist,
Remote Operation function can be
used with Method (2).
2. Remote Operation
OKA4051630R
1. Press and hold one of the Forward
( ) or Backward (
the smart key. Remote Smart
Parking Assist will automatically
control the steering wheel, vehicle
speed and gearshift. The vehicle
will move in the direction of the
button pressed.
2. Whilst Remote Operation function
is operating, if the you do not hold
down the Forward (
ward ( ) button, the vehicle will
6 218
) button on
) or Back -
Remote Smart Parking Assist (RSPA)
stop and function control will
pause. The function will start
operating again when the button
is pressed and held again.
3. When the vehicle reaches the tar -
get location, release the smart
key Forward or Backward button.
4. When the driver gets in the vehi -
cle with the smart key, a message
will appear informing the driver
Remote Operation function is
complete on the infotainment
system screen and the vehicle will
remain on.
In addition, when the Remote
Start ( ) button is pressed on
the smart key from outside the
vehicle, a message will appear
informing the driver Remote
Operation function is complete
and the vehicle will turn off.
Check that all smart keys are out -
side the vehicle when using
Remote Operation function.
Remote Operation function will
operate only when the smart key
is within 4 m (13 ft.) from the
vehicle. If there is no vehicle
movement even when the For -
ward or Backward button is
pressed on the smart key, check
the distance to the vehicle and
press the button again.
The detecting range of the smart
key may vary depending on the
surroundings that are affected by