Basic Operation; Measure And Source - East Tester ETX-2710 User Manual

2 Basic Operation

2.1 Measure and Source

This section acquaints you with some basic operations of ETX-2010/ ETX-1810.
Proceed as follows:
1. The connection of the calibrator as shown in Figure 2.1-1.
2. Press more than 2 seconds to turn on the calibrator. The calibrator checks
itself, including check on internal circuit and LCD, during which, LCD displays
all contents for 1s as shown in Figure 2.1-2:
Figure 2.1-1
5