shutdown mode, press
and
simultaneously. To adjust the time duration, press
simultaneously, the screen will display as shown in Figure 2.2-1,then press
to adjust the time between 1 and 30 minutes and then press
new time duration (Without pressing any key for 5 seconds, the calibrator will quit
from the adjustment automatically).
2.3 Backlight Brightness Adjustment
To adjust the brightness of backlight, proceed as follows:
1.
Please press
will display as shown in Figure 2.3-1:
2.
Press
and
3.
Press
will enter into the work mode(Without pressing key for 5 seconds, the calibrator
will exit from the adjustment automatically).
and
Figure 2.2-1
and
simultaneously until the buzzer work, then the screen
Figure 2.3-1
to adjust the brightness of backlight.
to save brightness level,
simultaneously. To enable the mode, press
will appear and then the calibrator
and
and/or
to store the
8