Table of Contents
Advertisement
2 Basic Operation
2.1 Measure and Source
This section acquaints you with some basic operations of ETX-2014/ ETX-1814.
Proceed as follows:
1.
The connection of the calibrator as shown in Figure 2.1-1.
2.
Press
checks itself, including check on internal circuit and LCD, during which, LCD
displays all contents for 1s as shown in Figure 2.1-2:
3.
Then the type of product and automatic shutdown time will be displayed for 2
for more than 2 seconds to turn on the calibrator. The calibrator
Figure 2.1-1
Figure 2.1-2
5
Advertisement
Table of Contents
