Table of Contents
Advertisement
3.
Then the product model（2010） and automatic shutdown time（30 min） will
be displayed for 2 seconds as shown in Figure 2.1-3.
4.
Then the default interface of boot will be displayed as shown in Figure 2.1-4:
5.
Press
, switch to the voltage mode. Switching is not required for this series
after starting-up.
6.
Press
7.
Press
to enter into DC mV output mode as shown in Figure 2.1-5.
Figure 2.1-2
Figure 2.1-3
Figure 2.1-4
to enter into output mode selection
6
Advertisement
Table of Contents
