Table of Contents
Advertisement
Attention:
Under different calibrator-thermocouple temperature environment, you shall
wait for one minute to stabilize the plug temperature after connecting TC to
input & output wiring.
2.
Press
3.
Press
necessary, pressing
4.
Press
DC mV value continue to display for 3s and then automatically return to the
original display .
Figure 4.1-1
to select measurement mode.
to display thermocouple reading as shown in Figure 4.1-2. If
continuously to select appropriate thermocouple type.
Figure 4.1-2
to display the DC mV value reading as shown in Figure 4.1-3. The
Process temperature
14
Advertisement
Table of Contents
