Basic Operations; Display Format - East Tester ET3501 Operating Instructions Manual

ET35 Series Digital Bridges（LCR）Operating Instructions
(5) System message area
It shows the system messages, warnings and error messages.
(6) Status Indication
It shows any status of the front panel when it is locked.

2.5 Basic Operations

The basic operations of ET35 is described as follows:
1. Use the menu keys and function keys to display the desired page.
2. Use the arrow keys to move the cursor to the desired field. When the cursor is
moved to a specific field, the image of the field will be reversed. The cursor can move
between fields. For some common parameter settings, use shortcut keys to select the
desired field.
3. The mark of the function key pointed at by the cursor will be shown automaticlally.
Press the desired function key.
Use input keys to enter numeric data. Press the next input key, and the function key
will become the available unit function key. Press these unit function keys or Enter key will
stop the input of the data.

2.6 Display format

(1) Display of component measurement
Press [Display Format] key, and the screen will show the display of component
measurement. Users can set the following measurement on the display.
function

bias

range

frequency

offset

trigger

level

speed

Hangzhou Zhongchuang Electron Co., Ltd.
8