East Tester ETX-2710 User Manual page 19

4.1.2 Manual compensation
Manual compensation through the key to set the cold end temperature compensation by
the user, the following steps shall be followed:
1. Press
appear of
means the value of manual compensation.
2. If you need to adjust the manual compensation value, press
adjust.
3. Press
setup mode at the same time, reading as shown in Figure 4.1.2-2.
4. If necessary, press
key to enter the set mode, reading as shown in Figure 4.1.2-1, the
sign shows that entering the setup mode, the assistant value
Figure 4.1.2-1
key to save the value of manual compensation and exit from the
key return to automatic compensation.
Figure 4.1.2-2
keys to
16