Table of Contents
Advertisement
16-4 SYSTEM TEST MODE
● Various settings start saving by selecting EXIT on each test screen and pressing
the TEST button. Saving is complete when it displays previous screen automati-
cally. Note that the settings will be lost if the power is turned off before saving is
complete
● The Test screen display may change depending on the OS version
● The System Test Mode controls various functions on the ALLS UX Game Board.
Only qualified technicians or SEGA personnel should make changes or adjust
settings in the System Test Mode
SYSTEM INFORMATION
STORAGE INFORMATION
USB I/O BD TEST
MONITOR TEST
COIN ASSIGNMENTS
CLOCK SETTINGS
NETWORK SETTINGS
SYSTEM CONFIGURATION
THIRD PARTY LICENSE
EXIT
Displays information on the keychip, board version and the
error log
Displays information on the installed Game
Displays information about the currently connected I/O
Board
Check the output of the Monitor
Change the Coin to Credit Ratio and Game Cost (note: this
should be done from the regular Game Test Mode)
Set the date and time (any changes overwritten by ALL.NET
games)
Check and test network settings between other Cabinets
Displays information specific to installed Game
Check Third Party License information
Return to the Game Test Menu
16
73
Advertisement
Table of Contents
