Table of Contents
Advertisement
● Handle molded parts with care. Excessive weight or pressure may cause them
to break and the broken pieces may cause injury
● To perform the operation safely and accurately you must use a safe, steady
footstool or stepladder. Working without this may lead to a fall and possible
injury
6
● When attaching or removing doors or lids, be careful that your hand or finger
does not get caught in anything
● Be very careful when handling the LED display screen. The screen can be
damaged easily and cannot be repaired once damaged. Such damage can
only be repaired by completely replacing the screen.
● Be careful not to damage parts surfaces. In some cases, if such surfaces are
damaged, the part must be replaced; it cannot be reinforced or repaired.
6-1 INSTALLING THE FLOOR
1
Remove the (11) highlighted fixings and remove Plate Floor Sensor Outer RH (MSJ-3023UK)
2
Perform the same procedure on the Plate Floor Sensor Outer LH (MSJ-3022UK)
16
Advertisement
Table of Contents
