Deleting A Pattern; Border Designs - Janome Continental M17 Instruction Book

z
q
z
x
c
e
x
q
w

Deleting a pattern

z Press on the pattern to delete.
x Press the delete key to delete the selected pattern.
q Delete key

Border Designs

Border design patterns can be accurately connected to
each other with the built-in marking points.
Example: Connecting border design patterns RE20d
#281 and SQ28d #194.
z Print designs (template sheets) on semi-opaque paper
for border design patterns RE20d #281 and SQ28d
#194 by using Artistic Digitizer Jr. (refer to pages
92-93).
q Design (template sheet)
x Place the design (template sheet) on the fabric and
mark the end points of the centerlines with tailor's
chalk. Draw centerlines on the fabric.
The horizontal line should be long enough to connect
the next patterns.
w Centerlines
c Set the fabric in the hoop and attach the hoop to the
carriage.
Select border design pattern SQ28d #194 and adjust
the hoop position with the jog keys.
Press the start/stop button and a message will appear
asking you to sew the first marking points.
Press the X key to skip sewing them and press the
start/stop button to start sewing.
e First marking points
89