Threading The Machine - Janome Continental M17 Instruction Book

z
q
w
r
v
c
y
v
b
i
n
!0
o
e
t
x
u
i

Threading the Machine

CAUTION:
Always make sure to press the lockout key to lockout
the machine before threading the machine.
z Press the needle up/down button to raise the take-up
lever to the highest position.
Press the lockout key to lockout the machine.
Press the presser foot lifter button to raise the presser
foot.
q Needle up/down button
w Thread take-up lever
e Lockout key
r Presser foot lifter button
x Raise the thread guide bar until it snaps.
Pass the thread through the guide on the thread guide
bar from behind.
t Thread guide bar
c Pass the thread through the left thread guide.
y Left thread guide
v Hold the upper thread with both hands as shown and
slip it under the thread guide plate.
u Thread guide plate
b Draw the thread toward you and pass it into the right
channel.
i Right channel
n Draw the thread down along the right channel and
around the bottom of the thread guide plate.
Pull the thread up along the left channel.
i Right channel
o Thread guide plate
!0 Left channel
27