Flag Garlands - Janome Continental M17 Instruction Book

z
c
b
n m
.
x
v
w
,

Flag Garlands

SQ28d #155 to SQ28d #157 are for flag garlands.
You can make your own flag garlands by embroidering
patterns on the flags.
z Select design pattern SQ28d #155.
x Edit your pennant design in the editing mode.
Press the OK key.
q OK key
q
c The Ready to Sew window will open.
Set the fabric in the hoop and attach the hoop to the
carriage.
Press the start/stop button to sew.
v Remove the hoop from the carriage when sewing is
finished. Remove the fabric from the hoop.
Cut out the pennant design along the outer seam.
b Fold back the top of the pennant to the wrong side of
the fabric as shown.
Use press cloth and iron the folded edge.
w Press cloth
n Sew the folded edge or paste the wrong side of the
folded edge with double-sided tape or glue.
Be sure to leave space to pass the cord through.
m Pass the cord through the hole as shown.
, Cut the fabric to the same size as the pennant design.
Sew the fabric to cover the back of the pennant.
. Repeat the procedure above and make your own flag
garland.
64