Cleaning The Inside Of The Thread Guide - Janome Continental M17 Instruction Book

z
q
x
e
w
c
q

Cleaning the Inside of the Thread Guide

Clean the inside of the thread guide plate under the top
cover at least once a month.
z Remove the needle thread and remove the thread
guide plate by pulling it up.
q Thread guide plate
x Clean the area around and under the pre-tension leaf
with the lint brush.
* Hold the tip of the pre-tension leaf softly and brush out
the dust.
w
w Pre-tension leaf
e Lint brush
w
c Set the thread guide plate on the machine.
Push the thread guide plate down to snap it in place.
q Thread guide plate
116