Machine Setting Mode - Janome Continental M17 Instruction Book

q
w
e
r
t
y
u
i
o
!1 !2
!4
!5

Machine Setting Mode

q Sound Volume
The signal sound can be adjusted by pressing the "+" or "–"
key.
Set the value to "OFF" by pressing the "–" key several
times to mute the signal sounds.
w Screen Brightness
You can adjust the brightness of the visual touch screen
by pressing the "+" or "–" key.
e Clock Display
You can turn off the clock display by pressing the OFF
key.
r Date and Time Setting
Press the clock key
Set the Year, Month, Day, Hour and Minute by pressing
the "+" or "–" key. You can select the display for the time
as a 24-hour clock or 12-hour clock. If you select the
display for the time as the 12-hour clock, you can also
select AM or PM.
y Year
u Month
i Day
o Hour
!0 Minute
!0
!1 24-hour clock
!2 12-hour clock
!3 AM / PM
t Inch/mm Option
You can set your machine's dimensional unit to either
inches or millimeters by pressing the "inch" or "mm" icon
key.
The default unit is millimeters.
!3
Press the next page key to show the next menu.
!4 Clean Bobbin Holder Message displayed every
10 hours
The caution message for cleaning the bobbin holder and
the hook race will be displayed when a certain time (10
hours) passes if this option is turned on.
The caution message will not be displayed when this
option is turned off.
!5 Standby Timer
The sewing lights will turn off and the machine will enter
standby mode if you do not use the machine within the
time period set by this timer. Doing any operation will turn
the lights and screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the "+" key
until "OFF" shows in the timer window.
98
to set date and time.