Removing The Embroidery Unit And Embroidery Tables - Janome Continental M17 Instruction Book

z
t
y
r
x
r
u
q
e
w
i
Removing the embroidery unit and embroidery
tables
CAUTION:
• Make sure to remove the embroidery tables before
removing the embroidery unit.
• Be sure to remove the embroidery unit and
embroidery tables when carrying or storing the
machine.
• Failure to follow these instructions may result in
damage to the embroidery unit and the embroidery
tables.
z Turn the power switch off.
Slide the embroidery tables (front/rear) as shown to
remove them from the embroidery unit.
q Power switch
w Embroidery table (front)
e Embroidery table (rear)
r Embroidery unit
CAUTION:
• Do not forcefully move the carriage or hoop socket
by hand whether the machine is in operation or not.
It may cause damage to the machine.
• Failure to follow the instructions may result in
damage to the carriage mechanism.
t Carriage
y Hoop socket
x Place your fingers to the embroidery unit release lever
at the left carrying handle of the embroidery unit.
Pull the embroidery unit release lever and slide the
embroidery unit gently to the left to remove it.
After the unit is completely removed from the machine,
lift the carrying handle slightly to move the embroidery
unit.
r Embroidery unit
u Carrying handle (embroidery unit)
i Embroidery unit release lever
34