Fringe Designs - Janome Continental M17 Instruction Book

z
x c v b
z
x c v b
When the bobbin threads are too narrow

Fringe Designs

Fringe designs are special patterns for creating fringed
flowers, applique and fringe frames.
The embroidery design easily turns into an attractive
fringed flower.
Example: Fringe designs SQ10d #290
z Select fringe designs SQ10d #290.
x Sew the pattern as you would sew a normal
embroidery design.
c Remove the fabric from the hoop.
v Cut the needle threads along the red broken line at
the outer edge of the pattern as shown.
b Ruffle the threads to make the fringe.
Alternative method for fringe designs
z Select fringe designs SQ10d #290.
x Sew the pattern as you would sew a normal
embroidery design.
c Remove the fabric from the hoop.
v Cut the bobbin threads on the wrong side of the fabric
along the red broken line as shown.
NOTE:
When the bobbin threads are too narrow to see and
cut, choose the bobbin threads you can cut and
remove them (shown as red dots).
b Pull the needle threads up and bring the loop ends to
the right side of the fabric to make the fringe.
57