Connecting Lace Design Sq28D #164 (Designs For Water Soluble Stabilizer) - Janome Continental M17 Instruction Book

n
z
n Sew the rest of the sections.
The 13th, 15th and 17th sections are the placement
guides. Place the flower designs created in step z
and sew over flower designs (same as done in step b).
Remove the design from the hoop.
Remove the water stabilizer by soaking the overall
design in a bowl of warm water to complete the
design.
Be sure that the lace piece to be attached is
completely dried out after removing from water.
NOTE:
• Do not rub or scratch the Designs for water soluble
stabilizer.
• Refer to page 37 for how to use a water soluble
stabilizer.
Connecting lace design SQ28d #164 (Designs for
water soluble stabilizer)
You can connect large lace design SQ28d #164 vertically
or horizontally.
Example: Connecting Lace Design SQ28d #164
vertically
z Draw centerlines on the water soluble stabilizer with
tailor's chalk.
q
The water soluble stabilizer and vertical line should be
long enough to connect following patterns.
q Centerlines
NOTE:
Do not use water soluble tailor's chalk.
The water soluble stabilizer will be washed away.
69