Stuffed Doll Designs - Janome Continental M17 Instruction Book

z
q
x c

Stuffed Doll Designs

You can make your own stuffed doll with the In-The-Hoop
Designs. Prepare the following materials.
• Fabric 1 (front side of the doll)
• Fabric 2 (rear side of the doll)
• Stabilizer (non-water-soluble)
• Wad cotton
* You can attach parts like horns with RE46d #51 and
RE46d #52. Prepare fabric of your desired design and
material.
Select the desired pattern from RE46d #51 to RE46d
#73.
Example: RE46d #51 + horns
z Attach a stabilizer on the wrong side of the fabric 1
and set the fabric in embroidery hoop RE46d (refer to
pages 36, 38-39).
Attach the embroidery hoop on the carriage (refer to
page 40).
q Fabric 1
w Stabilizer
NOTE:
Do not remove the fabric from the embroidery hoop
w
until the sewing project is finished.
x Embroider the following parts: both arms, cut-off
r
line, fangs, white of the eye, mouth, and eyeball. The
presser foot rises automatically when the machine
stops after the sewing of the eyeball is finished.
Place the horn shaped fabrics e (such as felt) as
shown on the illustration and fix them with sticky tape
e
or a pin.
* Do not use too thick fabric for the horns. It may not
be possible to embroider.
e Horns (desired material and shape)
r Sticky tape
c Lower the presser foot and sew the horns.
* Although the message "Color Change" is displayed,
you can continue sewing without changing the color
of thread.
62