Deleting Or Inserting A Pattern (Letter) - Janome TS200Q Instruction Book

z
x w
q
c
y t
q
v
b
e
r
u

Deleting or Inserting a Pattern (letter)

Example: To delete the pattern "
combination "
z Refer to procedure z to v on page 53, "Programming
the Pattern Combination" to enter the stitch patterns
33, 37 and 34 in mode 2.
x
number w which appears above the stitch width
stitch pattern in the combination, and the number e
total number of the pattens in the combination.
The green light r indicates the mode of the stitch
pattern.
c
number indicates "37" y, and the green light indicates
the mode u of the stitch pattern "37".
v Press the clear key. The stitch pattern 37 (
deleted from the pattern combination.
b Enter "31" in mode 2 to select stitch pattern 31 (
Press the memory key to insert the stitch pattern 31
between the stitch patterns 33 and 34.
Inserting Space between Patterns
Example:
z
x Press the memory key.
c
v Press the memory key.
b
the patterns.
54
" from the pattern
" and insert the pattern "
q. The
q. The
t, the stitch pattern
Spaces
Approximately 2.5 mm
Approximately 3.5 mm
Approximately 5 mm
".
) is
).