EMC2 Data Domain DD2500 Installation And Setup Manual page 24

Installation and Setup Guide
24 Installation and Setup Guide
ok, proceeding.
The system is going down for reboot.
7. After the system completes the reboot, login again as
number as a password. Press
prompt, and config setup wizard.
8. Generate an autosupport sent to yourself to use as ACG input
# autosupport send your.email@emc.com
OK: Message sent.
9. Generate an ACG using the produced ASUP.
sysadmin
to get through the EULA, sysadmin password
Ctrl-C
using the serial