Installation; Mounting - Safeline SL6 Manual

Installation

Mounting

If GSM interface is installed
it has priority. If no active
SIM card is used, GSM inter-
face should be disabled.
Mounting main unit
Install the main unit in the machine room. Mount the SL6+ main unit
to a stable surface (eg. wall, controller cabinet), using appropriate
screws. No termination resistance is needed at the ends of the bus.
To avoid GSM interference: place the main unit, the stations and
the GSM antenna at least 1,5 meters apart. The antenna must be
placed on a metallic (earthed) surface of at least 150x150 mm and
be placed standing (vertical).
>>1.5 m
0,1m ²
10
SL6+
>>1.5 m
>>1.5 m
SafeLine SL6+ v.3.9.0 EN