Activating The Sim Card; Bluetooth Led Indication - Safeline SL6 Manual

Activating the
SIM card
If you enter the wrong PIN
code 3 times, the SIM card
will be blocked, requiring
PUK code to unblock. If so,
the SL6+ can not be started
and LED3 will turn red.
Bluetooth LED
indication
Bluetooth LED
Flashing blue
Slowly flashing blue
Flickering blue
The SL6+ can only recognize the PIN code if the
code is set to "1234", "0000", "1111" or if it is
deactivated. If set to anything else, the SL6+ can
not use the SIM card.
If the PIN code is set to "1234", "0000"or
deactivated, the SIM card can be used on any of SafeLine's GSM
products.
Setting the PIN code
1. Insert the SIM card in an ordinary cell phone. In the phone's secu-
rity settings, change the PIN to "1234". If not possible, set the
PIN code to "0000" or, if available, set the "PIN code request"
option to "OFF".
2. Verify the PIN code by switching your phone off and on again.
3. Make a call from your phone to verify that the SIM card is active.
4. Make a call to the SL6+ after insertion to ensure there is a proper
connection.
"1111" PIN code
If the PIN is set to "1111", the code will be randomly generated by
the SafeLine GSM unit and memorized. This is a safety measure,
making sure the SIM card will only work with the selected SafeLine
GSM unit. To change the PIN again, use the PUK code provided to
you by your mobile services provider for setting up a new PIN.
If you want to upload a new SIM card for the GSM unit with a new
"1111" PIN, you will first need to upload a SIM card with PIN code
"1234" or "0000" to clear the old code in memory.
Advertising, the unit can be found by the LYNX scanner.
Initiating, takes about one second.
Connected, the unit is connected to a cellphone.
15 SafeLine SL6+ v.3.9.0 EN