Remote Configuration With Telephone: Step - Safeline SL6 Manual

Remote
configuration
with telephone:
step 2
If the time between the
operation of two keys
exceeds 10 seconds, the
code has to be re-entered. If
the time between exceeds
30 seconds, the call is
disconnected or configura-
tion mode is ended.
After having entered voice communication mode, use the
parameter codes found in the "Parameter List" to remotley
c onfigure the SafeLine SL6+.
Remote configuration,
external telephone
00
Dial to enter
configuration mode
2 short beeps
(waiting for PIN code)
Enter the password
*0000#
2 short beeps
(entering config. mode)
Enter code and data, eg:
*11*012341234#
2 short beeps?
Continue configure?
22
Invalid password
(one long tone)
Invalid input (one long tone)
Last code has to be re-entered
Quit configuration
*00*#
2 short beeps
Call disconnected or
end of configuration.
SafeLine SL6+ v.3.9.0 EN