On-Screen Keypad; User Menu - Satel INTEGRA INT-TSH2 User Manual

Table of Contents

INT-TSH2

SATEL

9. On-screen keypad

The on-screen keypad is displayed when you are required to enter a code e.g. to access the

user menu. You may be required to enter the code to access the user screen or the

additional screen or to run a function with a widget.

Fig. 4. On-screen keypad.

Enter the code using the number keys and tap

. If you made a mistake when entering the

code, tap

and re-enter the code (if you fail to enter the valid code within one minute,

it will be treated as if you entered an invalid code).

If you tap

before you enter the code, the on-screen keypad will close and you will return

to the previous screen.

By default, the following codes are programmed in the control panel:

service code: 12345

object 1 master (administrator) code 1: 1111

If there is an alarm in the system, it will be cleared after you enter the code.

Swipe up on the user screen / additional screen to go to the user menu. Since the access to

the user menu is code-protected, the keypad will open first. Enter the code. The menu will

open immediately if you have already logged in on the user screen.

Status icons are displayed in the top left corner of the screen (see p. 12).

Table of Contents

Do you have a question about the INTEGRA INT-TSH2 and is the answer not in the manual?