Power Cord; Printer - Amrotec MIB-9 Service Manual

CURRENCY DISCRIMINATION COUNTER
1-4. Setting Up Your Machine

1-4-1. Power Cord

Plug one end of the cord into the back of the machine and the
other end into a standard AC power outlet.
If you turn on the power switch, the machine will display version
and checksum. If there is Service Call number saved by a
service provider, the Call number will be displayed.

1-4-2. Printer

Your MIB-9 has a serial interface port, which allows you to connect the printer to print out counting result. To
connect the printer to the machine, follow the steps below:
1. Make sure that both the MIB-9 and the printer are turned off.
2. Plug the cable of printer into the serial port of MIB-9.
3. Turn on the printer and MIB-9.
CAUTION
In case that another port is used to avoid electrical shock, turn off MIB-9 and turn on
the machine after Port is connected.
- 8 -
MIB-9 SERVICE MANUAL
VERSION 01. 00
CHECKSUM OK
OC28
A/S NO.
321 7654 9876