Amrotec MIB-11V Service Manual
  1. Manuals
  2. Brands
  3. Amrotec Manuals
  4. Cash Counter
  5. MiB-11V
  6. Service manual

Amrotec MIB-11V Service Manual

Currency discrimination counter
Hide thumbs Also See for MIB-11V:
Table of Contents

Advertisement

Quick Links

Download this manual
Currency Discrimination Counter
Currency Discrimination Counter
Note
The information or material contained in this document is the property of AMROTEC® -
registered trademark of Amro-Asian Trade, Inc. Any recipient of the information or material
contained in this document shall not disclose or divulge, directly or indirectly, this document or
the information or material contained herein without the prior written consent of Amro-Asian
Trade, Inc.
The above duty of confidence also entails a prohibition of reproduction of this text without
specific authority, in writing, from Amro-Asian Trade, Inc.
This guide covers the installation, operation and troubleshooting of Mib-11V
Currency Discriminating Counter. We recommend reading this guide thoroughly
before operating the Currency Discriminator. Then, as you become more familiar
with Mib-11V, use it as a reference guide to look up information when you need it.
MIB-11V (Value)
Service Manual
(V1.1)
1
MiB-11V SERVICE MANUAL V1
Leading Image Processing Technology
We've been there when you needed

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIB-11V and is the answer not in the manual?

Questions and answers

Related Manuals for Amrotec MIB-11V

Summary of Contents for Amrotec MIB-11V

  • Page 1 This guide covers the installation, operation and troubleshooting of Mib-11V Currency Discriminating Counter. We recommend reading this guide thoroughly before operating the Currency Discriminator. Then, as you become more familiar with Mib-11V, use it as a reference guide to look up information when you need it.
  • Page 2 Please read the safety precautions below before operating MiB-11V Currency Discriminator Counter. These safety precautions guideline must be observed to avoid any potential hazards that could resulted in personal injuries or damage to MiB-11V Currency Discriminator Counter. Electrical Safety Information Always be careful in operating the Machine.
  • Page 3 Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 Precaution 1. Never push any objects of any kind onto the Machine side covers or insert any object through any opening of the Machine. 2. Do not operate your Machine in any wet location, or outdoors or if you are wet. Always keep liquid away from the Machine.
  • Page 4 WARNING Hazardous moving ports! Keep fingers and other body parts away Either the symbol , or a similar symbol, combined with the triangle shaped warning sign from ISO 3864-2, or the following statement or equivalent text shall be used: WARNING Keep away Hazardous moving parts from moving Stacker blades.
  • Page 5 Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 This manual shows user general symbols for safety information and symbols to identify special dangers. Refer to the below Icons before reading Manual. Icon Word Explanation This symbol with the signal word (Danger/...
  • Page 6 Recommended Tools Picture Name and Spec. Picture Name and Spec. Hexagonal L Wrench Screwdriver Ø1.5 L Wrench Screwdriver(+) Ø2 Spanner Screwdriver(-) 2.5mm Screwdriver(-) 1.5mm Long-Nose Multi-Meter Dust Blower Nipper Aerosol Anti-Static Gloves Dust Air Blower Rubber Coated  Dust Blower: Dust may cause to make a short in PCB so periodically clear dust apt to be accumulated inside of machine.

  • Page 7: Table Of Contents

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 TABLE OF CONTENTS Chapter 1 Machine Packing and Handling ----------------------------------------------- 10-11 Chapter 2 Machine Description, Control Panel & Display Screen --------------- 2-1. Description of the Parts---------------------------------------------------- 2-2. Description of Control ------------------------------------------------------ 2-3. Overview of Touch Screen ------------------------------------------------...
  • Page 8 6.5.2 Set A/S call ---------------------------------------------------------------- 6.5.3 Ethernet -------------------------------------------------------------------- 6.5.4 Save Image Data -------------------------------------------------------- 34-35 6.5.5 Reason View -------------------------------------------------------------- 6.5.6 Set Currency Map ------------------------------------------------------- 35-36 6.5.7 Set Machine Serial Number ------------------------------------------ 6.6 Value Setting (CF Level) ------------------------------------------------------- 6-6-1 CF level by Particular Currency Type ---------------------------- 6-6-2 CF level by different Currency Type ------------------------------ 6.6.3 CF level adjustment by denomination of currency type --- 37-38...
  • Page 9 Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 11-4 Timing between ADF and Pick-up Roller ------------------------------- 60 11.5 Information that requires your attention -------------------------------- 61 11.5.1 Connector ---------------------------------------------------------------- 61-62 11.5.2 Pulley Motor ------------------------------------------------------------- 11.5.3 Bracket CIS -------------------------------------------------------------- Chapter 12 S/W Upgrade and Image Data Downloading --------------------------------- 12.1 Software Upgrade --------------------------------------------------------------...

  • Page 10: Machine Packing And Handling

    Chapter 1. Machine Packing and Handling Packing List Part Name Remark MiB-11V Machine 1 Unit AC Power Cord 1 pc. User Manual 1 pc. Sensor Cleaning Cloth 1 pc. Work Area To help ensure trouble-free operation of the Machine, it is strongly recommended that you place the Machine on a flat, stable surface on your desktop or workstation.

  • Page 11: Machine Description, Control Panel & Display Screen

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 [Warning] If user inserts improper cable terminal into the port, the Machine could get shut off. Please check the right port before inserting cable terminal. Chapter 2. Machine Description, Control Panel & Display Screen...

  • Page 12: Description Of Control

    2-2 Description of Control Overview of Control panel (With detail information) Indication Description - Manually START the Machine (when Manual Start is set) - Emergency STOP & START during counting. - Save or set any counting or sorting modes or functions. - This key represents ‘OK’...

  • Page 13: Overview Of Touch Screen

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 2-3 Overview of Touch Screen...
  • Page 14 Name Description Indicators To show Auto or Manual start. While Auto start is 1-1 Auto or Manual Icon default, this Icon will appear if manual start is activated. These icons indicate which counterfeit detectors are 1-2 Counterfeit Icons active (UV/ IR/ MR detectors) or turned on. To show Customer display or PC is connected to 1-3 Interface Ports activity Machine.

  • Page 15: Preparation Of Machine Operation

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 Chapter 3. PREPARATION OF MACHINE OPERATION When Upper or Rear Cover is opened, Machine will display alarm message How to open and close ‘Upper Cover’ and ‘Rear Cover / Door’ [Upper Cover] Gently insert your fingers inside the tab and lift-up the Upper cover. Press hard on the “PUSH” area to close the cover.

  • Page 16: How To Place Banknotes Onto The Hopper

    How to place banknotes onto the Hopper It is very important to place the banknotes on the hopper correctly and towards the end because recognition performance of the banknotes is highly affected by the arrangement of banknotes in a stack. Number of rejected banknotes can increase when banknotes are not placed towards the end and not aligned and arranged properly.

  • Page 17: Counting

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 Counting In AUTO mode, Machine starts to count banknotes automatically after it detects the existence of banknotes on the hopper. In MANUAL mode, the Machine will start to count banknotes only if the banknotes are placed onto the hopper and ‘START’...

  • Page 18: Specifications

    Chapter 4. SPECIFICATIONS Item Unit Specification Recognition Sensor Dual (2) CIS (Contact Image Sensors) Hopper capacity Notes MAX. 300 (optional 1,000 w/Extension) Stacker capacity Notes 200 [Max.300 for new banknotes] Reject pocket capacity Notes 100 Max Display Type 4.3” Color Capacitive Touch Screen 3 RS232C Port (9 Pin D-SUB &...

  • Page 19: Admin Menu

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 Chapter 5. ADMIN MENU Admin menu Administrator or trained operator can make changes to the functions and parameters at this menu with a password. ADMIN MENU (Administrator Menu) Administrator or trained operator can make changes to the functions and parameters under this menu with password.

  • Page 20: Loading Default

    Set User Info Input Username and Password Auto clear Set up GT saving period Clear Target Select which total shall be cleared Grand Total Initialize all Initialize all total data Summary The summary of Day/Grand Total Each user Check GT for each user Export log data Log data can be exported to USB memory Log data...

  • Page 21: Machine Setting

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 5.3 Machine setting 5.3.1 Station ID: If User has multiple machines at a same location and prefer to identify them by an ID number, user will be able to do so. After a unique ID number of the Machine is selected from this sub-menu, that ID number for the machine will be displayed on the print report.

  • Page 22: Printer

    5.3.5 Printer: User can set up an External Dot Matrix or Thermal Printer (Printer Type) using this sub- menu item. Baud rate is set up as 9600BPS ( default) for both Dot and Thermal. Check with your Sales representative for available printers for this Machine. 1) Printer Interface: Administrator must select various parameter of Printer interface (Baud rate, Data bit, stop bit and Parity bit) The default factory setting for printer interface is shown at the above illustration.

  • Page 23: Function On/Off

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 5.4 Function on/off (for Highly Trained Users or Service Professional) 5.4.1 CF Detectors: Although not recommended, Administrator or highly-trained users can access to the below sub-menu under ADMIN MENU [Password] Function on/off  CF Items and able to turn on/off any or all CF detector sensors, such as UV, MR, IR individually using this sub-menu.

  • Page 24: Auto Default Loading

    5.4.3 Auto default loading: Administrator or trained users can turn on or off the ‘Auto default loading’ function from this sub-menu under ADMIN MENU. If Auto Default Loading function is turned ON (default is OFF), then when Machine reboots next, Machine will load the default factory settings automatically which means, users will lose each of their customization and preferred Modes and settings from the Machine software.

  • Page 25: Grand Total

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 5.4.5 Grand Total 1. Auto clear: Administrator or trained users can configure to clear “Grand total” automatically or manually using this sub-menu as illustrated below. Please take extra caution to clear Grand total as it cannot revert once cleared.
  • Page 26 4. Summary: Administrator or trained user can check, delete and print the summary of ‘The Day Total’ and ‘Grand Total’ by each user and by currency (USD default) if other currency software is purchased with this Machine from factory. Press button to change the currency and user during the selection.

  • Page 27: Log Data

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 5.4.6 Log data Export log data: Administrator can export all Log DATA; e.g., Count Detail in Currency / Count Detail in User / etc. by the format of EXCEL file. Follow the steps below: ①...

  • Page 28: Service Menu

    Chapter 6. SERVICE MENU How to enter SERVICE MENU: Press ‘MENU’  ‘MODE’  ‘55757’ Press ‘C’ key to return to previous screen. To Exit from the menu entirely and return to Main screen, press ‘MENU’ key.

  • Page 29: Save Default

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 6-1. Save default You can reset all the parameters in Service menu to initial factory level. But you cannot reset ‘Log Data’...

  • Page 30: Admin Pwd

    (special program which ‘AMROTEC®’ provides). Refer to the right picture. 1. From all pockets: You can use when you want to download image data from stacker and rejecter. 2. From stacker pocket: You can use when you want to download image data from stacker only.

  • Page 31: Touch Calibration

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 6-4-2. Touch calibration Touch calibration for screen. (In case touch screen doesn’t work, you can use USB type mouse) 6-4-3. Machine test ■ Self-test : Machine has a self-test mode that motors, sensors, pockets program can be tested by itself.
  • Page 32 ■ Sensor status report : This report shows the sensor status value by every 500ms. ■ Motor test : You can test motor is working and the speed. ■ Note-path test : If you put some notes on the hopper, you can see the notes are distributed as the choice.

  • Page 33: Log Data

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 6-4-4. Log data This mode provides exporting Log data to USB Stick (Format is ‘csv’). The procedure of Log Data Exporting is here below, [1] Insert USB Memory Stick into the USB Port of machine.

  • Page 34: Machine Setting

    6-5 . Machine setting 6-5-1 . Setting of date/ time: User can set up system date and time using this sub-menu according to their country’s standard year, date format and local time. 6-5-2 . Set A/S call: Setting A/S phone number 6-5-3 .

  • Page 35: Reason View

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 During machine downloading image data, machine will show as next figure. ‘AMROTEC®’ will modify the software using these image data after we got it from you. 6-5-5 . Reason View User can set how much information to show on the Machine Touch Screen as to reasons for all reject Banknotes.

  • Page 36: Set Machine Serial Number

    [In current S/W, 'Machine serial number' will be printed with counting result on your print report if Serial number is inputted here]. If users have their own bank app S/W connected to MIB-11V machine and if they need to input information such as 'Bank code' and 'Bank branch number', user can input in here.) 6-6.

  • Page 37: Cf Level By Particular Currency Type

    [The lower the number, it is less sensitive. If the level is ‘0’ (Zero), the sensor is deactivated] 6-6-2. CF level by different Currency Type (USD, Canada etc and if software is loaded) If MIB-11V machine is equipped with multiple world-currencies software, trained users can select different currencies and make necessary adjustment to counterfeit Detection sensitivity level.

  • Page 38: Cf Level Adjustment By Banking And Retail Version

    6-6-4. CF level adjustment by BANKING and RETAIL Version: [WARNING] MIB-11V software is already configured with 2 separate sub-software known as “Banking Level” and “Retail Level”. By touching on PRESET icon on the left, Trained user can get access to the below screen selection.

  • Page 39: Hopper Level

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 save the settings in the memory to be applied. However, this method is not very effective. 6-6-6. Hopper level If the machine does not detect banknote, or machine identifies that there is a presence of a...

  • Page 40: Function On/Off

    6-7. Function on/off 6-7-1. CF items Under this menu, administrator or trained users can set any or all the CF detectors (UV, MR, IR) On/Off at the same time and also can also turn them off/on individually. The table below illustrates the top indicator on the Main Screen as to which CF detectors are turned ON / OFF. 6-8.

  • Page 41: Calibration

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 6-9. Calibration Calibration is to make a full swing reference waveform to read the full level of a signal. If the machine rejects too many notes, please calibrate all the sensors such as ‘Tape sensors, CIS, UV sensors.

  • Page 42: Tape Calibration

    6-9-1. TAPE Calibration This Tape Calibration is for Tape Sensors. [Caution] You should use the Tape calibration sheet provided from AMROTEC® as below <CAP CALIBRATION SHEE(180 x 105 mm)
  • Page 43 Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 [Procedure] [1] Touch on TAPE Calibration MENU [SEVICE MENU-> Machine Management Calibration / TAPE Calibration] -> Machine will display right picture. (This moment, first step is done) [2] Open the Upper Door. [3] Put the ‘Tape film’ in this machine as upper picture...

  • Page 44: Cis Calibration

    6-9-2. CIS Calibration (IMAGE Calibration) Caution You should use the calibration sheet provided from Hyundai MIB International as below [Procedure] [1] Touch on CIS Calibration MENU [SEVICE MENU _ Machine management/ Calibration/ CIS calibration] [2] Open the upper door [3] Put the sheet in this machine as right picture [4] Close the upper door [5] Press [START/STOP] Key [6] Check if CIS Calibration result is “OK”...

  • Page 45: Uv Calibration

    Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 2. The result of Option CIS Calibration 3. The result of Option CIS IRR Calibration [7] After doing calibration, Open the upper door, and then take out the sheet. 6-9-3. UV Calibration This UV Calibration is for UV Sensors.
  • Page 46 [2] Open the upper door [3] Put the sheet in this machine as right picture [4] Close the upper door [5] Press [START/STOP] Key [6] Check if UV Calibration result is “OK” or “NG” [7] After doing calibration, Open the upper do and then take out the sheet. [The detail information for UV Calibration’s NG] If you meet UV NG, clean the UV sensors with soft cloth or check the cable connected with UV sensors.
  • Page 47 Currency Discrimination Counter MiB-11V SERVICE MANUAL V1 6-9-4. MR (Test) This MR test is for MR Sensors. <MR CALIBRATION SHEET: Real Banknote ‘US$ 1’ > [Procedure] [1] Touch on MR test MENU [SEVICE MENU _ Machine management/ Calibration/ MR calibration]...

  • Page 48: Hopper Calibration

    6-9-5. IR (Test) ‘IR TEST,’ this menu is only for checking IR sensor status. During machine counting, machine automatically calibrated by itself. Below calibration result shows ‘IR Trn. Sensor’ and ‘CIS1’(Receivers) work well or not. 6-9-6. Hopper Calibration [1] Make Black color reference sheet and attach it to the Hopper sensor as picture. [2] Press [START/STOP] Key [3] Machine will automatically adjust the sensitivity (Difference) about ‘900’...

  • Page 49: Chapter 7 Sensors

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 7. Sensors ● T: Transmitter ● R: Receiver RP1 (Jam1) CIS & IR Sensor Hopper UV & RP2 (Jam2) Sensor Rejecter Tape & MR RP3 (Jam3) RP5 (Jam5) RP4 (Jam4) Sensor Stacker To keep your machine working properly, please clean the sensors, the rollers and the scanning glass once a day.
  • Page 50 Currency Discrimination Counter MIB-11V/F Service Manual the notes in the machine and to recognize the denominations of the notes. Also the machine has special sensors for Fitness sorting function. These sensors are very sensitive and if they are not cleaned correctly every day, this may negatively affect the performance of the machine.

  • Page 51: Chapter 8 Boards

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 8. Boards 8-1. Side View of machine Main Motor Encoder Feed Motor Encoder OPE Board Harness from OPE to Main Main Board Pulley Feed Motor Pulley Main Motor Solenoid...

  • Page 52: Rear View Of Machine

    Currency Discrimination Counter MIB-11V/F Service Manual 8-2. Rear View of machine MTU Board (For UV Sensor) Amplifying the UV sensor signal and transferring Tape Amp. MR Amp. Amplifying the Tape  Input : MR sensor sensor signal and  Role & Output : Amplifying MR signal 8-3.

  • Page 53: Main Board

    Currency Discrimination Counter MIB-11V/F Service Manual 8-4. Main Board  The circuit for next. ◈ Sensors: Hopper, RP1 ~ RP5, Reject, Stacker, Micro Switch, Main Encoder, Feed Encoder, SB-7/9 Encoder (Detect Solenoid Direction) ◈ Driver for Main Motor, Feed Motor, Solenoid ◈...

  • Page 54: Chapter 9 Rollers

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 9. ROLLERS Please refer below picture.

  • Page 55: Chapter 10 Pulley & Belt

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 10. Pulley & Belt 10-1. Right side - Pulley PULLEY_S3M_18_FEED_MOTOR_MIB-11 PULLEY_ADF_V_S3M_40 PULLEY_S3M_22_MAIN_MOTOR_MIB-11 PULLEY_FEED PULLEY_S3M_20 PULLEY_FEED_S3M_22 PULLEY_O_RING SPUR_GEAR_16_O_RING SPUR_GEAR_124 10-2. Right side - Belt S3M_BELT_225 S3M_BELT_306 S3M_BELT_135 S3M_BELT_114 S3M_BELT_174 G90_O_RING...

  • Page 56: Left Side - Pulley And Belts

    Currency Discrimination Counter MIB-11V/F Service Manual 10-3. Left side – Pulley and Belt S2M_BELT_202 PULLEY_S2M_22 PULLEY_ADF_CLUTCH_4...

  • Page 57: Chapter 11 Adjustment

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 11. Adjustment 11-1. Hopper Sensor The right side of ‘PBA OPE’, there is ‘Variable resister’ for Hopper sensor sensitivity. Basically you can use ‘HOPPER CALIBRATION’ menu in the Service menu(Chapter 14), but just in case you want to adjust manually.

  • Page 58: Timing For Bracket Solenoid

    Currency Discrimination Counter MIB-11V/F Service Manual 11-2. Timing for ‘Bracket Solenoid’ If the notes are damaged by ‘Guide Selector’, ‘Selector Timing’ may be not properly adjusted. [1] Loosen SCREW slightly [2] Adjust ‘the Bracket Solenoid’ as picture. [3] Tighten the Screw 0.5mm...
  • Page 59 Currency Discrimination Counter MIB-11V/F Service Manual [1] Fix one of the pick-up rollers with one hand. [2] Grasp a note with another hand as picture, and insert it between gap of ‘Roller ADF’ and ‘Roller Separator’ The Gap should allow it.

  • Page 60: Timing Between Adf And Pick-Up Roller

    Currency Discrimination Counter MIB-11V/F Service Manual If the gap is too wide, Machine will reject more Double, Over run, Chain. If the gap is too narrow, Machine will make more ‘Feeding error’, ‘Jam1’. 11-4. Timing between ADF and Pick-up Roller The Belt timing between ‘Roller Pickup’...

  • Page 61: Information That Requires Your Attention

    Currency Discrimination Counter MIB-11V/F Service Manual 11-5. Information that requires your attention 11-5-1. Connector For the prevention of fractures of connector, please follow below separation rule. ① 1. ‘MR_AMP’ Board and ‘MTU’ Board 2. ‘Main’ Board -1 ③ ① ②...

  • Page 62: Pulley Motor

    Currency Discrimination Counter MIB-11V/F Service Manual 4. ‘OPE’ Board ② ③ ① 11-5-2. Pulley Motor To prevent ‘the Cover Side Right’ touch ‘Pulley Motor’, please follow below rule.

  • Page 63: Bracket Cis

    Currency Discrimination Counter MIB-11V/F Service Manual 11-5-3. Bracket_CIS To prevent jam error, ‘CIS’ should be assembled most lower location. are jam error, please follow below rule. Right side Left side...

  • Page 64: Chapter 12 S/W Upgrade And Image Data Downloading

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 12. S/W Upgrade and Image Data Downloading 12-1. Software Upgrade You can simply install new software for upgrade by USB Memory Stick. *Regarding the formatted type of USB Memory, ‘FAT32’ is recommendable under the Windows environment The steps for upgrade are as follows.

  • Page 65: Image Data Downloading

    Currency Discrimination Counter MIB-11V/F Service Manual 12-2. Image Data Downloading Using of LAN Port connection: [1] Connect Machine and PC using the LAN port. [2] On your PC, search by 'cmd' - >input 'ipconfig' -> check the 'ip address' (i.e.
  • Page 66 Currency Discrimination Counter MIB-11V/F Service Manual [5] You can see the IP address. Select Model ‘MIB11’ on top menu [6] Select LAN Port _Net 218 (as example) [7] Select the location of folder to save. (Right figure # 5) [8] You should make sub folder name as “Image sample”...
  • Page 67 Currency Discrimination Counter MIB-11V/F Service Manual Using of USB Stick: Download image data through 'USB memory stick. (1) Insert USB stick into the machine USB slot (2) Enter into “Service Menu” ->Menu + Mode -> 55757 -> Machine setting -> save Image data -> Select 'USB Storage path -> input file name -> press 'Enter' ->...
  • Page 68 Currency Discrimination Counter MIB-11V/F Service Manual < Prepare notes > Sort the notes by each denomination and version and arrange with same direction. <Note> Please do not mix. Do not mix different denomination. Do not mix different version (old and new version) Do not mix different face and orientation.
  • Page 69 Currency Discrimination Counter MIB-11V/F Service Manual [10] Set ‘Download Target’ if you move to ‘Service menu’ you can see ‘Download target’. The Default is ‘From all Pocket’, but you can set as you wish. Refer to the below examples, and you can select on the menu.
  • Page 70 Currency Discrimination Counter MIB-11V/F Service Manual < Note > How many banknotes images do we need for analyzing? The more the data, the more chances of better results from engineering analyzing as to identifying an issue or improve recognition of a particular denominations of banknotes or particular issues or particular type of counterfeit banknotes.

  • Page 71: Chapter 13 Maintenance

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 13. Maintenance Machine is built in various sensors to detect the malfunction of the machine the status of the notes in the machine and to recognize the denominations of the notes. The sensors are very delicate and...

  • Page 72: Clean All Sensors And Rollers

    Currency Discrimination Counter MIB-11V/F Service Manual 13-1. Clean all sensors and Rollers In case of feed roller, wipe with slightly dampened cloth with alcohol. While rotating one side of the roller manualy, stick the cloth into the other side of the roller.

  • Page 73: Dust Tray Cleaning

    Currency Discrimination Counter MIB-11V/F Service Manual Clean ‘Reject Sensors’ Clean ‘Reject Sensor prism’ Clean ‘Stacker Sensors’ 13-2. Dust Tray Cleaning Machine has “Dust tray” at the locations on below figure. it collects dust when the machine is running. How to clean...
  • Page 74 Currency Discrimination Counter MIB-11V/F Service Manual [3] Take the tray out & clean...

  • Page 75: Chapter 14 Lcd Error Message

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 14. LCD Error Message This chapter shows how to solve errors when the messages are on the operational window. 14-1. Initializing Running Error When MACHINE Power On, if there is any trouble at the sensors, motors and stackers and so on, it shows below figure [MACHINE STATUS INFORMATION].

  • Page 76: Error On Counting

    Currency Discrimination Counter MIB-11V/F Service Manual 2. Cleaning required, in case of covering dust. 1. Check ‘RP sensor #1’ to ‘RP sensor #5’. 2. Check each RP sensor with opening its door. Sensor NG 3. Cleaning required, in case of covering dust.

  • Page 77: Chapter 15 Board & Component

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 15. Board & Component 15-1. Connection Diagram...

  • Page 78: Board Descriptions

    Currency Discrimination Counter MIB-11V/F Service Manual 15-2. Board Descriptions 15-2-1. PBA_MAIN (Top Side) 15-2-2. PBA_MAIN (Bottom Side)
  • Page 79 Currency Discrimination Counter MIB-11V/F Service Manual 15-2-3. PBA_MTU (Top Side) 15-2-4. PBA_MTU (Bottom Side) 15-2-5. PBA_OPE (Top Side)
  • Page 80 Currency Discrimination Counter MIB-11V/F Service Manual 15-2-6. PBA_OPE (Bottom Side) 15-2-7. PBA_TAPE_AMP (Top Side) 15-2-8. PBA_MR_AMP (Top Side) 15-2-9. PBA_MRA (Bottom Side)
  • Page 81 Currency Discrimination Counter MIB-11V/F Service Manual 15-2-10. PBA_RP2 (Top Side) 15-2-11. PBA_RP2 (Bottom Side) 15-2-12. PBA_ RP3 (Bottom Side) 15-2-13. PBA_RP4 (Bottom Side)
  • Page 82 Currency Discrimination Counter MIB-11V/F Service Manual 15-2-14. PBA_ RP5 (Bottom Side) 15-2-15. PBA_ REJECT (Bottom Side) 15-2-16. PBA_ STACKER (Bottom Side) 15-2-17. PBA_ REJECT_O.F (Bottom Side)

  • Page 83: Chapter 16 Assembly Drawings

    Currency Discrimination Counter MIB-11V/F Service Manual Chapter 16. Assembly Drawings COVER SIDE OPEN ASS'Y_POCKET-1 ASS'Y_COVER_TOP ASS'Y_POCKET-2 COVER_TOP_ASS’Y SELECTOR ASS'Y_1 ADJUST_UPPER_ASS’Y SELECTOR ASS'Y_2 / SOLENOID ASS'Y ADJUST_SEPORATOR_ASS’Y ASS'Y_REINFORCE-1 BKT_SEPORATOR_ASS’Y ASS'Y_REINFORCE-2 TRANSFER_ROLLER_ASS’Y REJECT_BAR_ASS’Y ASS'Y_CASE_DETECT_UPPER ASS'Y_GUIDE_LOWER_TOP-1 DETECT_CASE_UPPER_ASS’Y ASS'Y_GUIDE_LOWER_TOP-2 CASE_DETECT_UPPER_1 ASS'Y_SMPS_BOTTOM and COVER CASE_DETECT_UPPER_2 BRAKET_SMPS_BOTTOM_ASS’Y...
  • Page 84 Currency Discrimination Counter MIB-11V/F Service Manual 16-1. COVER SIDE OPEN...
  • Page 85 Currency Discrimination Counter MIB-11V/F Service Manual 16-2. ASS'Y_COVER_TOP...
  • Page 86 Currency Discrimination Counter MIB-11V/F Service Manual 16-3. COVER_TOP_ASS’Y...
  • Page 87 Currency Discrimination Counter MIB-11V/F Service Manual 16-4. ADJUST_UPPER_ASS’Y...
  • Page 88 Currency Discrimination Counter MIB-11V/F Service Manual 16-5. ADJUST_SEPORATOR_ASS’Y...
  • Page 89 Currency Discrimination Counter MIB-11V/F Service Manual 16-6. BKT_SEPORATOR_ASS’Y...
  • Page 90 Currency Discrimination Counter MIB-11V/F Service Manual 16-7. TRANSFER_ROLLER_ASS’Y 16-8. ASS'Y_CASE_DETECT_UPPER...
  • Page 91 Currency Discrimination Counter MIB-11V/F Service Manual 16-9. DETECT_CASE_UPPER_ASS’Y 16-10. CASE_DETECT_UPPER_1...
  • Page 92 Currency Discrimination Counter MIB-11V/F Service Manual...
  • Page 93 Currency Discrimination Counter MIB-11V/F Service Manual 16-11. CASE_DETECT_UPPER_2...
  • Page 94 Currency Discrimination Counter MIB-11V/F Service Manual 16-12. TAPE_DETECT_MODULE and MR ARRAY...
  • Page 95 Currency Discrimination Counter MIB-11V/F Service Manual 16-13. ASSA’Y_CASE_DETECT_UPPER...
  • Page 96 Currency Discrimination Counter MIB-11V/F Service Manual 16-14. LEFT PLATE, PULLEY and ENCODER and BELT...
  • Page 97 Currency Discrimination Counter MIB-11V/F Service Manual 16-15. LEFT PLATE, ENCODER SENSOR and ASS'Y MICRO SWITCH...
  • Page 98 Currency Discrimination Counter MIB-11V/F Service Manual 16-16. RIGHT PLATE, BELT and O_RING...
  • Page 99 Currency Discrimination Counter MIB-11V/F Service Manual 16-17. RIGHT PLATE, PULLEY and GEAR...
  • Page 100 Currency Discrimination Counter MIB-11V/F Service Manual 16-18. ASS'Y_COVER_OP...
  • Page 101 Currency Discrimination Counter MIB-11V/F Service Manual 16-19. COVER_OP_ASS’Y...
  • Page 102 Currency Discrimination Counter MIB-11V/F Service Manual...
  • Page 103 Currency Discrimination Counter MIB-11V/F Service Manual 16-20. CIS(1) AND BLOCK STOPPER...
  • Page 104 Currency Discrimination Counter MIB-11V/F Service Manual 16-21. ASS'Y_CASE_DETECT_LOWER 16-22. ASS’Y_CASE_DETECT_LOWER...
  • Page 105 Currency Discrimination Counter MIB-11V/F Service Manual...
  • Page 106 Currency Discrimination Counter MIB-11V/F Service Manual 16-23. COVER REAR DOOR ASS'Y and DUST TRAY...
  • Page 107 Currency Discrimination Counter MIB-11V/F Service Manual 16-24. ASS'Y_GUIDE_LOWER_BOTTOM 16-25. GUIDE_LOWER_BOTTOM_ASS’Y...
  • Page 108 Currency Discrimination Counter MIB-11V/F Service Manual 16-26. ASS'Y_POCKET-1...
  • Page 109 Currency Discrimination Counter MIB-11V/F Service Manual 16-27. ASS'Y_POCKET-2...
  • Page 110 Currency Discrimination Counter MIB-11V/F Service Manual 16-28. SELECTOR ASS'Y_1...
  • Page 111 Currency Discrimination Counter MIB-11V/F Service Manual 16-29. SELECTOR ASS'Y_2 and SOLENOID ASS'Y...
  • Page 112 Currency Discrimination Counter MIB-11V/F Service Manual 16-30. ASS'Y_REINFORCE-1 16-31. ASS'Y_REINFORCE-2...
  • Page 113 Currency Discrimination Counter MIB-11V/F Service Manual 16-32. REJECT_BAR_ASS’Y 16-33. ASS'Y_GUIDE_LOWER_TOP-1...
  • Page 114 Currency Discrimination Counter MIB-11V/F Service Manual 16-34. ASS'Y_GUIDE_LOWER_TOP-2...
  • Page 115 Currency Discrimination Counter MIB-11V/F Service Manual 16-35. ASS'Y_SMPS_BOTTOM and COVER 16-36. BRAKET_SMPS_BOTTOM_ASS’Y...
  • Page 116 Currency Discrimination Counter MIB-11V/F Service Manual 16-37. ROLLER ASS'Y_1...
  • Page 117 Currency Discrimination Counter MIB-11V/F Service Manual 16-38. ROLLER ASS'Y_2...
  • Page 118 Currency Discrimination Counter MIB-11V/F Service Manual 16-39. ASS'Y, MAIN_MOTOR and FEED_MOTOR...
  • Page 119 Currency Discrimination Counter MIB-11V/F Service Manual 16-40. BKT_MOTOR 16-41. ASS'Y MOTOR SHIELD...
  • Page 120 Currency Discrimination Counter MIB-11V/F Service Manual 16-42. MOTOR_SHIELD 16-43. ASS'Y BKT_DUST_ROLLER and SHAFT_SUPPORTER...
  • Page 121 Currency Discrimination Counter MIB-11V/F Service Manual 16-44. BKT_DUST_ROLLER_ASS’Y 16-45. ASS'Y_SMPS_TOP...
  • Page 122 Currency Discrimination Counter MIB-11V/F Service Manual 16-46. ASS'Y_STACKER_SB11...
  • Page 123 Currency Discrimination Counter MIB-11V/F Service Manual 16-47. SIDE PLATE ASS'Y...

Table of Contents