Introduction This guide covers the installation, maintenance, and troubleshooting of X-1 Series Currency Discriminating Counter. We recommend reading this guide thoroughly before operating the Currency Discriminator. Then, as you become more familiar with X-1, use it as a reference guide to look up information when you need it.
5. Keep X-1 away from magnets, activated cellular phones, electrical appliances, or speakers within 13 cm / 5 inch. Cautions! Keep drinks, food, and other foreign objects away from the Currency Counter. Placing foreign objects on or into the Currency Counter can interrupt operation of the machine. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Chapter 2. Overview of X-1 X-1 at a Glance..........................8 Overview of Control Panel........................ 9 Overview of LCD Display ........................ 9...
Hopper Guide Top Bill Path Open Hopper 3.5 Inch color TFT Control Panel LCD Display Reject Pocket Stacker Pocket Bottom Bill Path Open PC Connection Socket Power Switch Serial Port Printer Power Socket Remote Display Socket SD Card Upgrade Socket AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Overview of Control Panel Navigation Keys INFO Number / Direction / Function 3.5 Inch TFT MODE Keys LCD Display PRINT / Start / Start (Clear) (Clear) User 1 User 2 Overview of LCD Display Current Time Detection Auto / Manual On / Off...
Selection of Currency........................16 Discriminating Modes ........................17 Definition of different Discriminating Modes:..................... 17 Counting Results ..........................18 ADD mode ............................20 Grand Total ............................. 21 Day Total............................22 Printing the Summary........................23 Clear error messages ........................23 Message Code ..............................24 AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Power On / Off To Power on X-1, Plug one end of the power cord into the back of the machine and the other end into a standard AC power wall outlet (properly grounded) or to a power strip. Turn on the Power Switch button On ("I") the right side of the device.
User 2. Press the key on the left side to switch to User 1. Clearing result. Press to clear results of the current User ( AMROTEC®...
Page 13
DRAFT - HIGHLY CONFIDENTIAL CNT Mode and Density selection: CNT - Count Mode In CNT mode, X-1 counts number of banknotes despite of denomination in a stack and at the end of the count, displays counted quantity at the center row of the LCD display. In the process, the total counted quantity is accumulated automatically and saved to memory.
Three different counting speeds (H, M and L) are shown sequentially on the right top of the LCD display as below: ♦ : 600 banknotes / min. ♦ : 800 banknotes / min. ♦ : 1000 banknotes / min. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Batch Counting X-1 allows users to select counting of banknotes by a preset number or by a desired amount in certain discriminating modes. • The keys are used to select batch number or amount • key is used to confirm the setting and to return to menu. The preset batch is shown on the bottom left of the LCD display How to set a batch by pieces: •...
Press and hold the A list of all the available currencies that the machine is equipped with would be displayed on LCD display. Use the direction keys or the to highlight your desired currency. Press the to confirm the selection. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Discriminating Modes X-1 is equipped with Five main discrimination counting modes; MIX, SINGLE, FACE, ORIENT and ISSUE modes. Furthermore, the machine provides further sorting modes to align single or mixture of banknotes with same face or same directions or issues. For details, please refer to the “Facing Sorting Mode”...
Display Result Mode The detailed result is shown with the value, quantity and subtotal of accepted banknotes. Direction keys to scroll down to go to the second page to display any remaining counted denomination not appearing on the first page. AMROTEC®...
Page 19
DRAFT - HIGHLY CONFIDENTIAL Grand Total Grand Total feature is only available when [ADD] mode is activated. In Grand Total mode, all confirmed transactions are accumulated to Grand Total list. Press to see Grand Total list of different counted currencies (apply to mult-currency model). Day Total Day Total feature only available when [ADD] mode is activated.
Day Total Press simultaneously to deactivate the ADD function. When ADD mode is turned off, the icon disappears from the display. Grand Total: Please refer to P.21 for further information. Day Total: Please refer to P.22 for further information. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Grand Total Grand Total feature is used for accumulating different counting results to the memory. To save a transaction to Grand Total, PRINT After counting is completed, press navigation button [Print] as shown above. Press [Print] again for confirming the transaction or Print receipt by pressing If counting result is confirmed, the current transaction is accumulated to the Grand Total.
All the confirmed transactions of a single day is listed and viewed on the display. Use the direction keys to change to different dates. Press Navigation button [Print] to print out Day Total receipts. : Print all the days. : Print one day. : Exit. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Printing the Summary X-1 can be connected with a Thermal or Dot-Matrix printer to the RS232 serial port to print current counting result or grand total and day total that are saved in the memory. Connect a Dot-Matrix printer with the device. The upper RS232 serial port is reserved for User 2.
Please check if any note jammed in occurs when power is on. the bottom bill path. Please make sure the encoder is Please Remove jammed note and test working correctly. again. If the error still occurs, please contact your service provider. AMROTEC®...
Under the Setting Mode, the below number keys represent as the direction keys: : (Up) : (Down) : (Left) : (Right). After highlighting a desired icon, press the [Start] key to confirm the selection. Confirming the selection. Return to main screen. Press the AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL This chapter will now describe each of the below function settings and its parameters in great length: Sound Setting Detection On/Off Printer Options Sorting Mode Setting Setup Device Mode Sound Settings To set different parameters of Sound Setting, first, Highlight the icon Confirm selection with the The Sound Setting menu will enter into a sub-menu:...
Page 28
When alarm is turned ON, the device sounds with a message code shown on the LCD display when there is a suspect or counterfeit banknote is detected. Selecting a desired mode. Use the direction keys or the for highlighting. Confirm setting. Press the key to confirm setting and return screen. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Detection On / Off User can turn ON or OFF counterfeit detection function while in Discriminating Modes (Default: In order to enter into the Setting Menu, On). Highlight the icon Confirm selection with the Setting detection : The device counts with counterfeit detection ON and delivers suspicious banknotes to the reject pocket.
Highlight the icon Confirm Selection with Find the proper baud rate. :9600bps :38400bps :115200bps Select the baud rate of the connected thermal printer. Use the direction keys or the for highlighting. Confirm setting. Press the to confirm setting and exit. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Sorting Mode Setting X-1 is equipped with three main Sorting Modes for further currency sorting need. These sorting modes are: FACE Sorting, ORIENT Sorting and ISSUE Sorting which are then divided into two sub-sorting features as described below: To enter into Sorting Mode Settings menu Highlight the icon Confirm Selection with the...
[A particular issue sorting for mixture of banknote denominations] : Issue sorting for single denomination banknotes. [A particular issue sorting among same banknote denominations] Select the desired mode. Use the direction keys or the highlighting. Confirm setting. Press the to confirm setting and return. AMROTEC®...
DRAFT - HIGHLY CONFIDENTIAL Setup Device Highlight the icon Confirm selection with the Setup Time To setup information of date and time. Highlight the icon Confirm selection with the Change date and time setting. Use the direction keys or the highlight a desire zone to modify.
DRAFT - HIGHLY CONFIDENTIAL Open Bill Path Open top bill path Open bottom bill path Cleaning X-1 Cleaning the cover of X-1 Periodically clean X-1 as follows: Prepare a mixture of a gentle kitchen-use detergent (one that does not contain abrasive powder or strong chemicals such as acid or alkaline.) Mix with 5 cup water with 1 cup detergent.
Warranty remedies limited to only parts repair or replacement of this product. Manufacturer, distributor, dealer or sales representatives of X-1 Series Currency Discriminator Counter shall not be liable for any incidental or consequential damages for breach of any express or limited warranty on this products or any part thereof.