Guide Selector - Amrotec MIB-9 Service Manual

CURRENCY DISCRIMINATION COUNTER

11-3. Guide Selector

If the notes are damaged as Jam3 often happens, Selector may be not properly adjusted.
.
Step 2. Open Rear Door. Put your hand inside of the machine and lift Guide SELECTOR as the below
image. (In this case, notes are sent to Stacker.)
Step 3. Be careful with the tip of Selector Guide so that notes are not jammed in the Selector while the notes
are transferred. (The image on the left among the below image is an example showing wrong
adjustment of Guide Selector. In this case, notes would be jammed in the Selector. )
- 48 -
( X )
MIB-9 SERVICE MANUAL
Step 1. Loosen SCREW slightly.
0.5 mm
( O )