Kenwood HM-582MD Instruction Manual page 53

4
Execute the track divide operation.
ENTER
Up to 255 track numbers can be inserted
additionally by repeating 1 to 4 for each of
them.
5
Eject the Mini Disc.
Even after completing MD editing, it is still possible
to cancel the settings in the current editing session
and restore the disc to the condition it was loaded
last time.
Note that this is possible provided that the MD is not
ejected yet.
Image of divide
Should be approx. 2 sec. or longer.
1 2
A
1 2
A B
Divided track (first half)
ˆ
3
B C
Track No. is adjusted
3 4
C
Divided track (second half)
Display after execution
"EDIT NOW" : Editing
"COMPLETE" : When editing is completed suc-
cessfully
"CAN'T EDIT" : When editing is impossible
÷ There is no blank space left between the two tracks.
÷ Track division may sometimes be impossible due to the
limitations of the MD standard.
÷ The MD recorder enters pause mode at the beginning of the
track newly created by division.
A.P.S.
MD
12:30PM
EJECT
TRACK
WRITING
Information is Mini Disc has been
being written. ejected.
While "WRITING" is displayed, do not impact
or move the unit because information about
Note Note
recording and editing is being written to the
Mini Disc.
Image of preview
Point selected by fine adjustment of dividing point
Playback for 3 sec
Place where the TRACK EDIT
key has been pressed
-31 0
Fine adjustment range
Contents
MD Edit Functions
MD
NO DISC
TONE TONE
A P S A P S
+31
53